Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 2318 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM220 HA Cluster - Swap sizes different!

luckman212
Hi all
We had to RMA one of our UTM220 devices for a faulty ethernet port.  We got a replacement and it has been running ever since (about 2 months)

Today I just happened to notice while poking around that the 2 devices have different amount of Swap configured:


I assume this might be a problem with the Active-Active setup.  Is there a way I can fix it so they both match? Also not sure which one is "correct" - 2gb or 3gb. thanks.


This thread was automatically locked due to age.
Parents
  • 0
    This is correct. They introduced the greater SWAP sizes in 9.2 (afaik).
    But these are only applied when reinstalling.
    So your only solution would be to reinstall node1 from ISO.

    As long as SWAP and RAM on node1 are not at 100% I'd prefer to leave it as it is...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0
    This is correct. They introduced the greater SWAP sizes in 9.2 (afaik).
    But these are only applied when reinstalling.
    So your only solution would be to reinstall node1 from ISO.

    As long as SWAP and RAM on node1 are not at 100% I'd prefer to leave it as it is...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML