Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 18 replies
  • Subscribers 2 subscribers
  • Views 3877 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

anyone installed 9.304-9 ?

fw115
if so, can you provide us with some feedback ?

thanks !


This thread was automatically locked due to age.
Parents
  • 0
    Hopefully, someone that knows will confirm this or tell me to correct it.

    I think the manual procedure for units in HA is:
    [LIST=1]ha_utils ssh to login to the Slave and become root there
    • cd /var/up2date/sys and wget the Up2Date to the slave
    • rsync the Up2Date file to the Master (example IP): loginuser@198.19.250.1:/home/login/
    • /sbin/auisys.plx --showdesc
        -  Don't start the Up2Date on the Slave: /sbin/auisys.plx --rpmargs --force
    • (I think you'll be logged out of the Slave when the reboot occurs.)

    • as root on the Master mv the Up2Date file from /home/login to /var/up2date/sys
    • /sbin/auisys.plx --showdesc
    • exit the command line
    • check 'Management >> High Availability' to confirm that the Slave is READY instead of SYNCING
    • Apply the Up2Date in 'Management >> Up2Date' - at the reboot, the Master will become the other node.
    [/LIST]
    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    SUM user be aware: till 9.303 and a SUM filter action where you have whitelisted websites configured, these websites had to be put in the "Block these websites" list.

    With 9.304 it looks like its working correct now, so your working SUM config is false and not working anymore. You will have to put your whitelisted websites to "Allow these websites" to make it work again [8-)]

    Administrating:

    • 2x UTM Software HA-Clusters (Active-Passive), Enthusiast Home Lab
    • 1x UTM525 HA-Cluster (Active-Passive), Full Guard, 6x AP15, 2x AP30, 40x RED10, 1x RED50
    • 1x SG230, Full Guard, 6x AP10, 1x AP15
    • 1x UTM220, Full Guard, 16x AP10
    • 1x UTM220, Full Guard
Reply
  • 0 in reply to BAlfson
    SUM user be aware: till 9.303 and a SUM filter action where you have whitelisted websites configured, these websites had to be put in the "Block these websites" list.

    With 9.304 it looks like its working correct now, so your working SUM config is false and not working anymore. You will have to put your whitelisted websites to "Allow these websites" to make it work again [8-)]

    Administrating:

    • 2x UTM Software HA-Clusters (Active-Passive), Enthusiast Home Lab
    • 1x UTM525 HA-Cluster (Active-Passive), Full Guard, 6x AP15, 2x AP30, 40x RED10, 1x RED50
    • 1x SG230, Full Guard, 6x AP10, 1x AP15
    • 1x UTM220, Full Guard, 16x AP10
    • 1x UTM220, Full Guard
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?