Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 2 subscribers
  • Views 3777 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configuration of AP30 on SG 125 with VLANs

pohnit
Hi All,

It is my first post here , so please be patient with me. [:)]
I seek help for the configuration of Sophos AP30 on Sophos SG125. Here is my setup:

SG125 with firmware 9.205-13
2x HP switches
3xVLANs - VLAN 2, VLAN 5 and VLAN 7
3x Sophos AP30

I would like to configure all 3 Access Points to broadcast 3x Wireless networks, one for every VLAN I have - WiFiNet2, WifiNet5 and WifiNet7. I know that I should use the option "Bridge to VLAN" when configuring the Wireless network. 

My question is: How to configure the port on the SG 125 (Ethernet Static or Ethernet VLAN), which is intended to connect to the Access Points?
Should I have untagged Ethernet Static configuration or use VLAN Tagging and configure a VLAN tag on the port? [:S]

Many thanks in advance for your support!


This thread was automatically locked due to age.
Parents
  • 0
    Yes, Stoyan, in my example above, I assumed that VLAN2, VLAN5 and VLAN7 were all on the same trunk into the SG.  It's possible to Link Aggregate several NICs on the SG125, and then put all three VLANs on the LAG, but you can't Link Aggregate after the VLANs are created.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Yes, Stoyan, in my example above, I assumed that VLAN2, VLAN5 and VLAN7 were all on the same trunk into the SG.  It's possible to Link Aggregate several NICs on the SG125, and then put all three VLANs on the LAG, but you can't Link Aggregate after the VLANs are created.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?