This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configuration of AP30 on SG 125 with VLANs

Hi All,

It is my first post here , so please be patient with me. [:)]
I seek help for the configuration of Sophos AP30 on Sophos SG125. Here is my setup:

SG125 with firmware 9.205-13
2x HP switches
3xVLANs - VLAN 2, VLAN 5 and VLAN 7
3x Sophos AP30

I would like to configure all 3 Access Points to broadcast 3x Wireless networks, one for every VLAN I have - WiFiNet2, WifiNet5 and WifiNet7. I know that I should use the option "Bridge to VLAN" when configuring the Wireless network.

My question is: How to configure the port on the SG 125 (Ethernet Static or Ethernet VLAN), which is intended to connect to the Access Points?
Should I have untagged Ethernet Static configuration or use VLAN Tagging and configure a VLAN tag on the port? [:S]

Many thanks in advance for your support!

This thread was automatically locked due to age.

Parents

0 pohnit over 10 years ago

Hi Barry,

unfortunatelly not. I still don't know if I should configure the switchports as trunks or as acess ports. The topic you pasted was about something else.
Can I configure the port on the SG 125, which connects to teh AP as Ethernet Static or Ethernet VLAN?
Depending on this I will know how to configure the swicthports.
Thaks again!

Regards!
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 pohnit over 10 years ago

Hi Barry,

unfortunatelly not. I still don't know if I should configure the switchports as trunks or as acess ports. The topic you pasted was about something else.
Can I configure the port on the SG 125, which connects to teh AP as Ethernet Static or Ethernet VLAN?
Depending on this I will know how to configure the swicthports.
Thaks again!

Regards!
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Configuration of AP30 on SG 125 with VLANs

Submitted a Tech Support Case lately from the Support Portal?