This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware for Home UTM with FIOS 75/75

My (home, typically 2 users) bandwidth seems to be higher than most I've seen here in hardware discussions so I thought I'd seek some advice. Currently at my Verizon router using Verizon's speed test page I see ~85Mbit/s down and ~75Mbit/s up. I have an existing TZ100 that I want to replace which even with all services off restricts me to ~60Mbit/s down and a brutal (relatively speaking) ~10Mbit/s up. 

I've tossed around a couple of ideas (C2000, i3, i5, Xeon E3-1200) and I'm now torn between the Haswell i3 and the Xeon. From what I've read the C2000 and i5 won't provide additional benefit over the i3 as Sophos isn't really going to leverage all those cores. I'd like to future proof myself for 100-150Mbit/s u/d speeds as I plan to keep what I build for at least 3 years.

I'm looking at the (Haswell) Gigabyte GA-6LASL board (micro atx, and is dual LAN enough or should I look at the quad GE boards so I have an extra for OOB management?) which will handle either the i3 or the Xeon. The i3 I had tentatively selected was the i3-4150 as it seems to be a good price/performance balance, assuming it can handle the bandwidth.

Curious as to who has a good enclosure choice for this build as well. The plan is to put it on a shelf on a two post rack in the basement with the rest of the network gear. Preferably as few fans as possible as in the basement it's likely to pull in dust, so any comments on running these with little air movement would be appreciated.


This thread was automatically locked due to age.
Parents
  • The i3-4150 and Gigabyte boards you reference are a good selection to build from. The i3 is a Dual Core so won't be too underloaded plus has a high core clock which helps for IPS & Webfiltering. It has AES-NI so SSL/TLS/excryption will get a boost. The board runs Intel NIC's so should be solid. If you do chose another board, look for Intel or Broadcomm NIC's as they are solid under load. Realtek and other's I'd shy away from
  • So I am noticing a lot of LGA1150 "server" boards include a single i210 and an i217 which seems to be a desktop gbe. Any thoughts on whether I should opt for something with dual i210 gbe or 82xx instead? Also kind of stuck on a good chassis. I'm looking at Supermicro boards now, uATX, and they have a lot to select from as far as chassis. Single vendor simplifies this slightly. Thoughts?

    Current Buy List:

    Supermicro x10sl7 (dual i210 at a $80 premium over i210/217 option)
    i3 4150 
    8 GB  ecc crucial
    WD 500GB SATA
Reply
  • So I am noticing a lot of LGA1150 "server" boards include a single i210 and an i217 which seems to be a desktop gbe. Any thoughts on whether I should opt for something with dual i210 gbe or 82xx instead? Also kind of stuck on a good chassis. I'm looking at Supermicro boards now, uATX, and they have a lot to select from as far as chassis. Single vendor simplifies this slightly. Thoughts?

    Current Buy List:

    Supermicro x10sl7 (dual i210 at a $80 premium over i210/217 option)
    i3 4150 
    8 GB  ecc crucial
    WD 500GB SATA
Children
  • Hi,
    I don't think the i210 chip is supported by UTM yet? The i217 is.
    I have had to add an extra NIC to my i3-4130 board while waiting for a kernel upgrade.
    You will need fans, even just to keep the dust moving, probably  the most important in a small case is an efficient power supply. The mini-atx case I am using the power supply gets hotter than the CPU.

    Ian