Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 2110 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Guest Wifi behind RED 10 with Split Tunneling

ALTEMO
Hello,
I want to setup a  Guest Wifi behind RED 10 with Split Tunneling.

The whole Setup works perfect, except that issue that Split Tunneling doesn't work.

All Internet Traffic through my Guest SSID goes through the tunnel.

Is it possible to get that seperated so that the Internet Traffic stays on my remote site?
The RED has Split Tunneling enabled and for cabled connections the Split Tunneling works.

Thank you.

Dino


This thread was automatically locked due to age.
  • 0
    Hi, Dino!

    I don't know of a way to do this as the Guest SSID terminates inside the UTM.  The only traffic that can be split is from an SSID bound to a LAN behind a RED.

    Cheers - Bob
  • 0
    Hey Bob,
    thank you for your reply.

    This confirms my tests in our Lab.

    Let me ask you a question.
    How can I bind the SSID to a Network behind the RED?

    I can bridge to the AP LAN, but I cannot choose which one I want to bridge to!?
  • 0
    Dino,

    I think this can be done with a VLAN switch in the RED 10 location, but that a cheap, wireless router between the RED and the WAN connection would be the most cost-effective Guest solution if you want to provide full-speed.

    However, I wonder if the client really wants this...  There is that risk that the non-guests will try to take advantage of faster connections at lunch time and expose their laptops to an un-protected internet.

    Cheers - Bob