Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 613 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2 internal NICs

iseeku
Hello

I have a UTM on Hyper-V installed. Everything works fine so far. I have 1 external NIC with IP 192.168.5.10, one internal NIC with IP 192.168.3.10. Now i wanted to add another internal NIC with IP 192.168.4.10 to seperate both internal networks. how can i make this? i only can add new external Interfaces.

regards
Jan


This thread was automatically locked due to age.
Parents
  • 0
    My thoughts are either you need another interface to bind the network to or you need to bind the second subnet to the existing internal interface. Are you trying to keep the 2 networks isolated from one another? If you are I would recommend another interface be added and use a vlan for it.
Reply
  • 0
    My thoughts are either you need another interface to bind the network to or you need to bind the second subnet to the existing internal interface. Are you trying to keep the 2 networks isolated from one another? If you are I would recommend another interface be added and use a vlan for it.
Children
No Data