Hello together,
we are now in the progress to change the firewall from an old system to the sophos utm. We came to the decision that the appliance solutions from sophos would be to small therefore we look asked some offers for the Hardware but we do not know if the sophos utm software will be compatible and run smoothly on these Hardware configurations or if there are any chipsets on it which are not compatible.
We asked our partners and also sophos but we couldn't get any better answer then could be may be and shoud be tested.
Therefore I want to ask with this post if anyone have tested the following hardware configurations:
Fujitsu:
Fujitsu PY RX200S8 4x2,5
1x PY RX200S8 4x2,5
2x Intel Xeon E5-2690v2 10C/20T 3.0GHz 25MB
2x Performance Mode Installation BIOS setup
8x 8GB (1x8GB) 1Rx4 L DDR3-1600 R ECC
1x DVD-RW supermulti slimline SATA
2x SSD SAS 12G 200GB Main 2.5' H-P EP
1x RAID Ctrl SAS 6G 1GB (D3116C) RAID Level
0/1/5/6/10/50/60, opt FBU
1x TFM Modul für FBU Option auf D3116
1x RAID Ctrl FBU option with 25cm cable Flash
Battery Backup Unit
1x Upgrade-Kit auf 2xGb und 2x10Gb on-board 2 port
10Gb Eth Server Adapter based on Intel LAN
Chip 82599
1x Rack Cable Arm 1U für RMK-F1 Drop-in-Rails
1x iRMC S4 advanced pack activation key for
graphical console redirection and remote media
redirection
2x Modular PSU 800W platinum hp 2nd or additional
PSU hp for redundancy
2x Cable powercord rack, 4m, grey IEC 320 C14
connector
1x Fan Upgrade Kit 2. CPU incl. 2 Fans for
RX200S8
Or
DELL:
PowerEdge R620, Intel Xeon E-
26XX v2 Processors
1 Intel Xeon E5-2690v2 3.0GHz, 25M Cache, 8.0GT/s QPI, Turbo, HT, 10C, 130W, Max Mem
1866MHz
1 Intel Xeon E5-2690v2 3.0GHz, 25M Cache, 8.0GT/s QPI, Turbo, HT, 10C, 130W, Max Mem
1866MHz,2nd Proc
1 Case with up to 8 Harddrives and 3 PCIe-Sockets, only Low-Profile-PCI-Cards
1 1866MT/s RDIMMs
8 8GB RDIMM, 1866MT/s, Standard Volt, Dual Rank, x8 Data Width
1 DIMM-Module for Systems with 2 Processors
2 Coppercooling for PowerEdge R620 with Processors with a minimum of 130W
1 VFlash, 8GB SD-Card for iDRAC Enterprise
2 200GB SSD SAS Value SLC 6Gbit/s 2,5Zoll Harddrive Hot-Plug-able
1 PERC H710 Integrated RAID-Controller, 512MB NV Cache
2 10GbE SR SFP+ Transceiver, 10GB and 1GB compatible for Intel and Broadcom Serveradapter
1 DVD+/-RW, SATA, internal
1 Dual Hot-Plug-able redundant powersupply (1+1) 750W
1 Cabel for Mini PERC Cards for Case with up to 8 harddrives
1 Broadcom 5720 QP 1Gbit/s Networkadapter
2 Broadcom 57810 DP 10Gbit/s DA/SFP+ Converged Network Adapter, Low Profile
1 Module,Printed Wiring Assy,Planar,Server,Dell Computer Corporation,R620,V2
1 RAID 1 für H710p, H710, H310 Controller
1 iDRAC7 Enterprise
Both servers come with the info that they are SLES certified from their producers.
Could anybody report if he have expiriences with these Servermodells?
Many thanks in advance
the_networker
This thread was automatically locked due to age.
