This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Single AP for Private / Public Access

Hello,

I'm a UTM newbie setting up my first software UTM.

I want to setup a single wireless access point (AP) with both public and private access using two SSID's. One SSID will have access to the internal network and the other SSID have access to the internet.

I was thinking of a software UTM with three NICs (Internal, Access Point,  External).

I was hoping to put the single AP in a ground floor office that would also cover the office above. Or would it be better to have one AP per floor ?

Can UTM be setup in this way ?

Which Sophos AP would be suitable? Laptops would access the internal network and mobile devices (iPhone) would access the internet.

Sophos AP are relatively expensive. Is there a list of non Sophos AP that I could use instead ? I would prefer to use DLInk, TPLink or Netgear AP if possible. But open to other suggestions.

Any other advice would be appreciated.

Regards,

WindyMiller


This thread was automatically locked due to age.
Parents
  • The big advantage to the Sophos APs is that you don't have to separate them from any of your other LANs as they send traffic to the UTM via an encrypted tunnel. I usually configure one SSID bridged to the internal network using WPA2 Enterprise with RADIUS authentication, and a Guest SSID using WPA2-Personal.

    Cheers - Bob

    Sorry for any short responses.  Posted from my iPhone.
Reply
  • The big advantage to the Sophos APs is that you don't have to separate them from any of your other LANs as they send traffic to the UTM via an encrypted tunnel. I usually configure one SSID bridged to the internal network using WPA2 Enterprise with RADIUS authentication, and a Guest SSID using WPA2-Personal.

    Cheers - Bob

    Sorry for any short responses.  Posted from my iPhone.
Children
No Data