This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error after Installation during the Boot Process

Hello Community,

i have a Problem with the Sophos UTM Software [:(]
I try some time to install the Sophos UTM Software on my Hardware.
The first try was to install Sophos on a virtual Machine that works.

Now i want to install it on own Hardware.
CPU: AMD Athlon x2 6000+
Mainboard: Asrock ALiveNF6G-VSTA
RAM: 4 GB DDR2 von OCZ
Disk: SATA 200GB

The Installation run without Errors after that Sophos need an Reboot.
I pick out the Disk and the System reboot.
Now come the errors during the boot.
I have 7 time reinstalled.

Now some Pictures of the Errors
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5

I hope you can help me and sorry for my English [:$]

Greetz
MaverikX

This thread was automatically locked due to age.

Parents

0 sebokopter over 11 years ago

Verify the MD5 checksum of your new burned CD with the MD5 checksum provided from us.

If you still have problems with the Installation try to use a LiveCD with memtest and run the memtest.
The first boot message of your pictures suggest some errors in paging. Which is CPU and RAM related. If your Ubuntu and Debian systems are running on the same hardware than this is probably not the problem. But better be safe than sorry [:)]
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 sebokopter over 11 years ago

Verify the MD5 checksum of your new burned CD with the MD5 checksum provided from us.

If you still have problems with the Installation try to use a LiveCD with memtest and run the memtest.
The first boot message of your pictures suggest some errors in paging. Which is CPU and RAM related. If your Ubuntu and Debian systems are running on the same hardware than this is probably not the problem. But better be safe than sorry [:)]
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data