This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM bridge mode

Hi,

I have just finished my own Sophos UTM build for my home network, two nics and fanless which I'm very happy with.

I have a Juniper router connected at the edge, I want to test bridge mode in this scenario.

The juniper ports can be configured in switch mode, but am I right in thinking I will need a separate switch? Does the UTM have to sit between with nothing else connected to the Juniper other than the UTM?

The juniper does the routing and dhcp for my internal lan so how would this work?

Thanks
Ross

This thread was automatically locked due to age.

Parents

0 Ross86 over 11 years ago

Thanks Barry, I thought that was the case.

One other question...if my switch connects to my Juniper acting as the gateway for a couple of different vlans, would I need to remove these so only the utm connects to the Juniper?

I am going to try Sophos on the edge doing everything, I just wanted to test it in this configuration first.

Thanks
Ross
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Ross86 over 11 years ago

Thanks Barry, I thought that was the case.

One other question...if my switch connects to my Juniper acting as the gateway for a couple of different vlans, would I need to remove these so only the utm connects to the Juniper?

I am going to try Sophos on the edge doing everything, I just wanted to test it in this configuration first.

Thanks
Ross
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data