This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Up2Date 9.107 Released

Hi there,

last up2date for this year! We have uploaded UTM 9.107 with several fixes. Details see below...

Regards,
Eric

------------------

Sophos UTM 9.107

News


  • Bugfix release


Remarks


  • System will be rebooted
  • Configuration will be upgraded
  • Connected REDs will perform firmware upgrade
  • Connected Wifi APs will perform firmware upgrade


Bugfixes


  • 21794 Support UTM 9 install on ASG 120 Rev4 with 2GB Memory
  • 22571 UTM-RED Client with dynamic IP doesn’t re-establish the tunnel
  • 23727 Wifi: it should not be possible to set the same Mesh name twice
  • 24059 Aua fails to handle customized user group attributes
  • 24430 Sporadic reboots probably caused from sip helper
  • 24572 Automatic Monitoring shows Uplink Interface as ONLINE although it is down
  • 25219 If Inline PGP decryption fails the customer is getting an empty mail
  • 25323 Obviously wrong traffic counting
  • 25459 WiFi Separate Zone: Suddenly it’s not possible to process traffic via the AP due to incorrect RED peer address
  • 25492 Policy routing not working together with full transparent mode of HTTP proxy
  • 25572 Default gateway for DSL interface not set probably in link failover setup
  • 25657 Do not imply filename and next-server when specifying DHCP options 66/67
  • 25910 [e1000] Reset Adapter after Update to 9.100 and some Intel Interfaces
  • 25931 False Positive during WAF Upload
  • 25940 Several core dumps in __kernel_vsyscall (/usr/apache/bin/httpd -k restart)
  • 25980 DHCP server does not provide IP address if address pools are used
  • 26077 WAF real server is switching to error state every 5-10 min without any known reason
  • 26273 Improvement of Notification Information in notifier.log
  • 26388 RED50 Traffic not possible, red_server reports “Unable to get proc entry”
  • 26450 Upon upgrade, “The web filtering URL regular expression object with the name ‘Any domain expressions’ already exists”
  • 26656 RAS Manager is not able to change or create SSL VPN Profiles
  • 26850 Default gateway for PPPoE interface not set after reconnect
  • 26929 If username contains a ‘\’ SSL VPN config is not stored correctly on the client
  • 26933 hotspot doesn’t work in an active active cluster environment
  • 27084 high cpu load from postgres. Caused from pfilter reporter
  • 27198 Not possible to decrypt an email if there are more than one empty lines between header and body
  • 27253 Search Engine reports do not work if uppercase domain name is used
  • 27362 SAA doesn’t work for AD users
  • 27421 Disabled RED devices are always able to establish a connection to the UTM
  • 27455 Adding an additional interface to PPPoE interface takes it down
  • 27473 Visit of ZDF mediathek will cause a display bug in websec reporting.
  • 27479 mdw died on UTM100/110 if QoS is enabled without a selector
  • 27597 red_server dies after RED reconnect – no further connection possible until UTM reboot
  • 27685 New Packetfilter block rules doesn’t work for established connections
  • 27777 WiFi: Radius packets which should be going to a server routed via IPSec goes out on external interface
  • 27789 RED status overview not matching real tunnel status
  • 27862 User accounts with less then 3 characters in the username are not consider from the reporting
  • 27865 Transparent Split mode doesn’t resolve names correctly on RED50
  • 27887 [e1000e] Reset adapter unexpectedly
  • 27910 Unable to configure the HTTP default profile in the global section caused by AP connected via RED
  • 28053 swap partition did not get a UUID
  • 28223 The websecurity manager is not able to change or create some proxy settings
  • 28323 Unable to create or change any additional address at the ASG
  • 28327 HTTP Proxy segfault in PCRE match()
  • 28413 Multipath is routing packets on wrong interface after one load balanced ipsec connection fails
  • 29164 UTM failover although the syncing process is not finished (prefered master option enabled)
  • 29900 RED50 freeze after update to 9.107 SR
  • 29954 Endpoint: Not working anymore after update to 9.107 SR


Download Link: ftp://ftp.astaro.de/UTM/v9/up2date/u2d-sys-9.106017-107033.tgz.gpg
MD5 Sum: e234126ffb6602e48c60d2ffc3e13130
Size:  ~127MB


This thread was automatically locked due to age.
Parents Reply Children
  • Well at least that means I'm not crazy [:)]

    I don't know, I can check later.  I have no doubt that if they work up a patch that works on my 9.107 installation that they will include the same patch in some build of 9.2 (or in the beta).

    I passed on to my support contact that you were able to produce the same crash in 9.191 so that the beta devs were aware of it.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • Kernel version info (for Barry):

    9.107 w/ Patch
    Linux version 3.8.13.12-50.ge1bcb5b-smp64 (abuild@sles11) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Wed Jan 8 12:54:14 UTC 2014

    9.107 w/out Patch
    Linux version 3.8.6-39.g8a65a05-smp64 (abuild@axgbuild) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Mon Nov 11 14:54:05 UTC 2013

    for comparison, my 9.191 install:
    Linux version 3.8.13.13-27.g2eba80a-smp64 (abuild@axgbuild) (gcc version 4.3.4 [                  gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Wed Dec 18 11:05:41 UTC 20                  13

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.