This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware for home firewall

Hello everyone
I have one virtualized UTM running at my current home but I am also planning to have one on a second location I live

Any suggestions for check hardware that does the job?

It should be low energy, 3 NiCs (two would work too using VLAN), silent (WAF required [;)] ) and of course support activation off all UTM features (+ future new features), so not too slow.

Looking forward to hearing what you guys use at home

Best regards


This thread was automatically locked due to age.
Parents
  • Atom's are not powerfull enough for IPS.
    I used one, but with only webfiltering (and no IPS) I only got about 80Mbps on speedtest.
    Get a high MHz powerfull processor.
    I just bought a Haswell i5 4570 which does a good job and with about everything switched on can use the full bandwidth of my ISP (150Mbps).

    If power usage if of any concern than go for 4th generation Intel Core (Haswell) processors.

    It seems i3 is also powerfull enough, but use one with high MHz ranking.

    My current (i5) system draws between 32 and 33 Watts when idle (which it is most of the time in my home situation).
Reply
  • Atom's are not powerfull enough for IPS.
    I used one, but with only webfiltering (and no IPS) I only got about 80Mbps on speedtest.
    Get a high MHz powerfull processor.
    I just bought a Haswell i5 4570 which does a good job and with about everything switched on can use the full bandwidth of my ISP (150Mbps).

    If power usage if of any concern than go for 4th generation Intel Core (Haswell) processors.

    It seems i3 is also powerfull enough, but use one with high MHz ranking.

    My current (i5) system draws between 32 and 33 Watts when idle (which it is most of the time in my home situation).
Children
No Data