This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

new NIC support? Intel i210 / i211 / i217 & Atheros AR8161B

Hi, I'm eyeing a GigaByte GA-Z87N-WIFI motherboard for a project for a friend, and am wondering if the NICs would work in the UTM...

Other sites list them as:
1. Intel i217V
2. Atheros AR8161 or AR8161B 
3. some intel wifi NIC

I know the wifi isn't supported, but am wondering about the other 2...

Atheros: Some sites say the Atheros needs some version of the atl1c or atl1e module; other sites say it needs the 'alx' module, which I don't see on 9.105 at least.

lspci -vv | grep Atheros
02:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10)

Intel: apparently current versions of the e1000e driver support this NIC, but it's not clear when the support was added, or if the UTM has a new enough module.


Also, does anyone know if these NICs perform well, and work for VLANs?

This is the only mini-ITX board I've seen with Haswell CPU support, and dual non-realtek NICs.
I know Jetway offers some Intel NIC add-on modules for some of their boards.

Thanks,
Barry


This thread was automatically locked due to age.
Parents
  • I just realized I have another motherboard here with a (single) Intel i217V NIC; I booted 9.105 on it and the NIC is recognized by the installer.
    I did not proceed with installation.

    Hopefully the rest of the recent Intels are supported as well.

    This still leaves the question as to whether the Atheros chips are supported.

    Barry
Reply
  • I just realized I have another motherboard here with a (single) Intel i217V NIC; I booted 9.105 on it and the NIC is recognized by the installer.
    I did not proceed with installation.

    Hopefully the rest of the recent Intels are supported as well.

    This still leaves the question as to whether the Atheros chips are supported.

    Barry
Children
  • Hi Barry,
    that is not good news about the motherboard, I bought one to try out because my favourite Intel mini-itx server board is not available in 1150 pin version.
    I have the mb installed in a case ready for UTM installation. Thankfully the case does have space for an expansion card.

    Ian