This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

tiny UTM Home build - Gigabyte Brix

Hi,

I thought I'd share some thoughts of a UTM Home build i'm looking to do.

At the moment i'm running the UTM as a virtual machine on my Server Essentials 2012 box but that just makes that machine sluggish so I want to move it to it's own hardware.

I've been eying off SFF and USFF devices for a while a Gigabyte has just release their latest version of their BRIX devices which look perfect for the task.

So my thought is:
Gigabyte BRIX GB-BXCE-2955
4gb memory
30gb mSATA SSD

The BRIX has a single ethernet port and built in WiFi.
I can connect an ADSL modem to the ethernet port but does anyone know if I can use the built in WiFi to make the UTM an access point? 
Otherwise I'll just use it as the internal interface to my network via my existing WiFi AP.

I'm now waiting on pricing and availability of this new model.

Thoughts?


This thread was automatically locked due to age.
Parents
  • Hi,

    Hmm... well I guess I'm going to have to look at other options with two physical NICs.
    The Intel NUC boxes only have a single NIC also.

    So I guess I'll have to look for a Mini ITX board.
    Gigabyte has a board with built in Celeron which is low profile and has two NICs: GA-C1007UN-D
    or it's bigger cousins: GA-H87N which is a Mini ITX board with dual NIC that can take any current intel CPU.

    A hypothetical build on the GA-H87N works out to about $460 AUD.
    Gigabyte GA-H87N-WIFI (also has a WiFi card. may be cheaper if I can find without)
    Intel Pentium G3220 cpu
    4gb memory
    64gb SSD
    Antec ISK 300-150 Mini-ITX Case

    I'll keep doing a little more research.
    I do want to find cheap and low power. 

    --
    It's probably just a memory capacity issue on my existing SE box.
    I'd rather have a dedicated UTM box so it's not affected by other OS & HW upgrades.

    (BarryG, Intel 525 30gb mSATA SSD)

  • So I guess I'll have to look for a Mini ITX board.
    Gigabyte has a board with built in Celeron which is low profile and has two NICs: GA-C1007UN-D
    or it's bigger cousins: GA-H87N which is a Mini ITX board with dual NIC that can take any current intel CPU.
    ...
    (BarryG, Intel 525 30gb mSATA SSD)


    Hi, the GA-C1007UN-D has Realtek NICs which are not known for very good performance at high speeds or high CPU load.
    The H87N has an Intel and an Atheros NIC. Intel are great, some Atheros stuff is very good, but I would verify compatibility with the UTM before purchasing.

    30GB is about the minimum requirement for the UTM right now, you might want to get something bigger for longer lifetime (both in terms of wear and in terms of future UTM versions).

    The Celeron 1.5GHz doesn't sound too impressive, but it depends on your needs:
    a. bandwidth?
    b. features used? (HTTP Proxy aka Web Protection, AntiVirus, IPS, VPNs, ...)

    Barry
Reply

  • So I guess I'll have to look for a Mini ITX board.
    Gigabyte has a board with built in Celeron which is low profile and has two NICs: GA-C1007UN-D
    or it's bigger cousins: GA-H87N which is a Mini ITX board with dual NIC that can take any current intel CPU.
    ...
    (BarryG, Intel 525 30gb mSATA SSD)


    Hi, the GA-C1007UN-D has Realtek NICs which are not known for very good performance at high speeds or high CPU load.
    The H87N has an Intel and an Atheros NIC. Intel are great, some Atheros stuff is very good, but I would verify compatibility with the UTM before purchasing.

    30GB is about the minimum requirement for the UTM right now, you might want to get something bigger for longer lifetime (both in terms of wear and in terms of future UTM versions).

    The Celeron 1.5GHz doesn't sound too impressive, but it depends on your needs:
    a. bandwidth?
    b. features used? (HTTP Proxy aka Web Protection, AntiVirus, IPS, VPNs, ...)

    Barry
Children
No Data