This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cable Modem Interface going up and down

Hello,

I have an issue with an UTM 110/120 ans Software 8.309

We have attached a cable modem on ETH1 with DHCP.

The interface is going down and up 5-10 times a day.
It is down for about 1 Minute if I believe the Emails, but in real the interface seems to be up all the time.

I already tried to fix the interface on the UTM to 100 FDX Speed, this also didn't help.

Does someone have the same issue?

The strange thing is, it worked perfect over weeks, and the last 5 days this issue started, with no change on the UTM. The UTM has an uptime of 76 days.

Thank you for your help!

Best regards,
Dino


This thread was automatically locked due to age.
Parents
  • No, we speak from DHCP to the Cable Modem.

    The Cable Modem in Bridge mode passes the public IP to the UTM by DHCP.

    We also have Hitron Modems.

    Today this happend for the first time also with PPPOE Interfaces after upgrade to 9.1

    The PPPOE Interface has MTU 1492 and is connected directly to a Dlink DSL Modem 321B.

    Maybe this is a v8/v9 issue?
Reply
  • No, we speak from DHCP to the Cable Modem.

    The Cable Modem in Bridge mode passes the public IP to the UTM by DHCP.

    We also have Hitron Modems.

    Today this happend for the first time also with PPPOE Interfaces after upgrade to 9.1

    The PPPOE Interface has MTU 1492 and is connected directly to a Dlink DSL Modem 321B.

    Maybe this is a v8/v9 issue?
Children
  • And the strange thing is, at home i have a Cisco EPC3212 EuroDocsis 3.0 Modem and not those problems.

    it also seem that this only occurs if theres a bit more traffic on the line but it can be wrong since its at daylight when most people are on the internet