This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

After Upgrade to 9.100-16 CPU load is 100%

Hi,

i use UTM 9 at home and i tried to update with Up2Date. The base is ESXi 5.1 and the UTM 9 is a virtual machine on it.

After Upgrade to 9.100-16 the CPU load is 100% for hours. After reboot the same problem.

Before the update i take a snapshot and after reset to this snapshot (UTM 9.006-5) everything is ok.

Is there any solution for the problem with 9.100-16?

Thanks for feedback.

Greetings 
Erwin


This thread was automatically locked due to age.
Parents
  • I have the same problem. I just reinstalled from the 9.1 ISO, restored the config file, and I still have 100% CPU.
    I finally managed to SSH in, and ran top. It looks like kworker is the problem.

    Any ideas how to fix this? I'm worried my fanless hardware is going to cook itself!

    top - 11:36:01 up 8 min,  2 users,  load average: 4.66, 3.36, 1.66
    Tasks: 143 total,   6 running, 135 sleeping,   0 stopped,   2 zombie
    Cpu(s):  5.0%us, 92.4%sy,  2.3%ni,  0.0%id,  0.0%wa,  0.0%hi,  0.3%si,  0.0%st
    Mem:   2066016k total,   942312k used,  1123704k free,    17472k buffers
    Swap:  1048572k total,        0k used,  1048572k free,   330456k cached

      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
      216 root      20   0     0    0    0 R 46.5  0.0   2:53.45 kworker/0:1
     1002 root      20   0     0    0    0 R 46.5  0.0   2:53.61 kworker/0:2
     5286 wwwrun    20   0 66936  63m 7708 S  2.0  3.1   0:07.20 webadmin.plx
     5600 root      20   0 46984  31m 1996 S  1.3  1.6   0:03.81 confd.plx
     5959 root      39  19 39592  32m 4096 R  0.7  1.6   0:01.39 gen_inline_repo
       10 root      20   0     0    0    0 R  0.3  0.0   0:00.66 rcu_sched
     2622 root      20   0  7068 3184 1688 S  0.3  0.2   0:01.41 syslog-ng
     3529 postgres  20   0  561m 2328 1328 S  0.3  0.1   0:00.04 postgres
     4400 root      20   0 31272  22m 2644 S  0.3  1.1   0:00.46 smtpd.bin
     5272 wwwrun    20   0 11144 4576 2672 S  0.3  0.2   0:00.17 httpd
     5398 snort     19  -1  471m 214m 2400 S  0.3 10.6   0:16.06 snort_inline
     5712 root      39  19  8968 7216 2288 S  0.3  0.3   0:00.27 create_rrd_grap
     5731 postgres  20   0  562m 5748 4472 S  0.3  0.3   0:00.30 postgres
        1 root      20   0  1912  592  516 S  0.0  0.0   0:00.33 init
        2 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kthreadd
        3 root      20   0     0    0    0 S  0.0  0.0   0:00.06 ksoftirqd/0
        5 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kworker/0:0H
        6 root      20   0     0    0    0 S  0.0  0.0   0:00.01 kworker/u:0
        7 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kworker/u:0H
        8 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0
        9 root      20   0     0    0    0 S  0.0  0.0   0:00.02 rcu_bh
       11 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 khelper
       12 root      20   0     0    0    0 S  0.0  0.0   0:00.01 kworker/u:1
      108 root      20   0     0    0    0 S  0.0  0.0   0:00.00 bdi-default
      110 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kblockd
      205 root      20   0     0    0    0 S  0.0  0.0   0:00.00 khubd
      321 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kswapd0
      383 root      20   0     0    0    0 S  0.0  0.0   0:00.00 fsnotify_mark
      399 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 crypto
      988 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 edac-poller
      997 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 deferwq
     1054 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 ata_sff




    EDIT: I ran the "/etc/init.d/postgresql92 rebuild" command, and rebooted, and the problem seems fixed. I think I'll wait a while before upgrading my home router.
Reply
  • I have the same problem. I just reinstalled from the 9.1 ISO, restored the config file, and I still have 100% CPU.
    I finally managed to SSH in, and ran top. It looks like kworker is the problem.

    Any ideas how to fix this? I'm worried my fanless hardware is going to cook itself!

    top - 11:36:01 up 8 min,  2 users,  load average: 4.66, 3.36, 1.66
    Tasks: 143 total,   6 running, 135 sleeping,   0 stopped,   2 zombie
    Cpu(s):  5.0%us, 92.4%sy,  2.3%ni,  0.0%id,  0.0%wa,  0.0%hi,  0.3%si,  0.0%st
    Mem:   2066016k total,   942312k used,  1123704k free,    17472k buffers
    Swap:  1048572k total,        0k used,  1048572k free,   330456k cached

      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
      216 root      20   0     0    0    0 R 46.5  0.0   2:53.45 kworker/0:1
     1002 root      20   0     0    0    0 R 46.5  0.0   2:53.61 kworker/0:2
     5286 wwwrun    20   0 66936  63m 7708 S  2.0  3.1   0:07.20 webadmin.plx
     5600 root      20   0 46984  31m 1996 S  1.3  1.6   0:03.81 confd.plx
     5959 root      39  19 39592  32m 4096 R  0.7  1.6   0:01.39 gen_inline_repo
       10 root      20   0     0    0    0 R  0.3  0.0   0:00.66 rcu_sched
     2622 root      20   0  7068 3184 1688 S  0.3  0.2   0:01.41 syslog-ng
     3529 postgres  20   0  561m 2328 1328 S  0.3  0.1   0:00.04 postgres
     4400 root      20   0 31272  22m 2644 S  0.3  1.1   0:00.46 smtpd.bin
     5272 wwwrun    20   0 11144 4576 2672 S  0.3  0.2   0:00.17 httpd
     5398 snort     19  -1  471m 214m 2400 S  0.3 10.6   0:16.06 snort_inline
     5712 root      39  19  8968 7216 2288 S  0.3  0.3   0:00.27 create_rrd_grap
     5731 postgres  20   0  562m 5748 4472 S  0.3  0.3   0:00.30 postgres
        1 root      20   0  1912  592  516 S  0.0  0.0   0:00.33 init
        2 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kthreadd
        3 root      20   0     0    0    0 S  0.0  0.0   0:00.06 ksoftirqd/0
        5 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kworker/0:0H
        6 root      20   0     0    0    0 S  0.0  0.0   0:00.01 kworker/u:0
        7 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kworker/u:0H
        8 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0
        9 root      20   0     0    0    0 S  0.0  0.0   0:00.02 rcu_bh
       11 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 khelper
       12 root      20   0     0    0    0 S  0.0  0.0   0:00.01 kworker/u:1
      108 root      20   0     0    0    0 S  0.0  0.0   0:00.00 bdi-default
      110 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kblockd
      205 root      20   0     0    0    0 S  0.0  0.0   0:00.00 khubd
      321 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kswapd0
      383 root      20   0     0    0    0 S  0.0  0.0   0:00.00 fsnotify_mark
      399 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 crypto
      988 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 edac-poller
      997 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 deferwq
     1054 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 ata_sff




    EDIT: I ran the "/etc/init.d/postgresql92 rebuild" command, and rebooted, and the problem seems fixed. I think I'll wait a while before upgrading my home router.
Children
No Data