This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cheap soultions for a sophos utm gateway?

I wanted to know what would be a cheap solution for a sophos gateway?  

Looking for something that will not draw much power but also has the performance of a full pc or a hardware appliance.  

Any Suggestions?


This thread was automatically locked due to age.
Parents
  • I use an Foxconn barebones case I picked up from Newegg for my house of 5 devices, 2 users.  It's fantastic for this environment and very low power.  I have all of my core network devices on an APC battery backup, and total load is no more than 35-40w (NAS, Astaro box, switch - ISP router is elsewhere in the house).  I just had to supply the memory and HDD for it, which I already had.  [:)]  I am seeing a 1mb limit in downloading for some reason, and speedtest.net shows 6-10mb downloads on all of my tests.  I've tried it with both web protection on and off, not sure where the bottleneck is.  Both NICs are 1Gb ethernet.

    XG 19.5 GA 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | GB Ethernet x5

  • I use an Foxconn barebones case I picked up from Newegg for my house of 5 devices, 2 users.  It's fantastic for this environment and very low power.  I have all of my core network devices on an APC battery backup, and total load is no more than 35-40w (NAS, Astaro box, switch - ISP router is elsewhere in the house).  I just had to supply the memory and HDD for it, which I already had.  [:)]  I am seeing a 1mb limit in downloading for some reason, and speedtest.net shows 6-10mb downloads on all of my tests.  I've tried it with both web protection on and off, not sure where the bottleneck is.  Both NICs are 1Gb ethernet.


    which case?

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Reply
  • I use an Foxconn barebones case I picked up from Newegg for my house of 5 devices, 2 users.  It's fantastic for this environment and very low power.  I have all of my core network devices on an APC battery backup, and total load is no more than 35-40w (NAS, Astaro box, switch - ISP router is elsewhere in the house).  I just had to supply the memory and HDD for it, which I already had.  [:)]  I am seeing a 1mb limit in downloading for some reason, and speedtest.net shows 6-10mb downloads on all of my tests.  I've tried it with both web protection on and off, not sure where the bottleneck is.  Both NICs are 1Gb ethernet.


    which case?

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Children
No Data