This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[9.0044-33] Spikes of High CPU and memory

Hi All

I am using v9.0044-33 with UTM 120 rev 5. I am also using disk as part of the htp_local_db

It seems that the box is spiking on cpu and the memory is high .I have attached the relevant pic

As part of the troubleshooting I used perf top
Results 
  
   PerfTop:    1403 irqs/sec  kernel:22.1%  exact:  0.0% [1000Hz cycles],  (all, 2 CPUs)
-------------------------------------------------------------------------------------------------------------------------------------

    58.13%  pngquant                [.] 0x558a
     4.60%  libz.so.1.2.3           [.] longest_match
     2.41%  libpng12.so.0.31.0      [.] 0xf93c
     2.21%  [kernel]                [k] read_hpet
     1.40%  [unknown]               [.] 0x8050ed3
     1.07%  libz.so.1.2.3           [.] deflate_slow
     0.97%  libc-2.11.3.so          [.] msort_with_tmp
     0.93%  libcairo.so.2.10800.8   [.] unpremultiply_data
     0.68%  perf                    [.] 0x1e000
     0.59%  libc-2.11.3.so          [.] memcpy
     0.58%  libexpat.so.1.5.2       [.] 0xf9e6
     0.56%  libz.so.1.2.3           [.] fill_window
     0.48%  libfontconfig.so.1.3.0  [.] .L110
     0.47%  ld-2.11.3.so            [.] do_lookup_x
     0.39%  libc-2.11.3.so          [.] _int_malloc
     0.36%  ntpd                    [.] 0x1d013
     0.36%  libfreetype.so.6.3.18   [.] TT_RunIns
     0.33%  libfreetype.so.6.3.18   [.] 0x17a25
     0.33%  libfontconfig.so.1.3.0  [.] FcCompareFamily
     0.32%  libasapsdk.so           [.] 0x20c35
     0.29%  libc-2.11.3.so          [.] strstr
     0.27%  libz.so.1.2.3           [.] adler32
     0.24%  libperl.so              [.] 0x101f1f
     0.22%  libc-2.11.3.so          [.] __i686.get_pc_thunk.bx
     0.21%  postgres                [.] 0x2b7d4c
     0.20%  libpixman-1.so.0.16.0   [.] pixman_rasterize_edges
     0.20%  libc-2.11.3.so          [.] malloc
     0.20%  libc-2.11.3.so          [.] strcmp
     0.19%  [kernel]                [k] __kmalloc
     0.19%  libc-2.11.3.so          [.] __memset_ia32
     0.18%  libz.so.1.2.3           [.] inflate_fast
     0.18%  [kernel]                [k] unmap_vmas
     0.17%  [vdso]                  [.] 0x55576431
     0.16%  [kernel]                [k] __schedule
     0.16%  [kernel]                [k] page_fault
     0.16%  [kernel]                [k] ia32_sysenter_target
     0.16%  libpthread.so.0         [.] 0xefbf
     0.15%  [kernel]                [k] timerqueue_add
     0.14%  libc-2.11.3.so          [.] _int_free
     0.14%  libpixman-1.so.0.16.0   [.] pixman_edge_init
     0.14%  [kernel]                [k] _raw_spin_lock
     0.14%  [kernel]                [k] hpet_legacy_next_event
     0.14%  libc-2.11.3.so          [.] free


what is that process and why it's inroducing spikes to the box?

/root # top -b -n 1 | head -n 12  | tail -n 5
13298 root      39  19  3640 2080  632 R     90  0.1   0:00.73 pngquant
 3729 root      20   0 11528 4788 1772 S     12  0.2  91:02.42 selfmonng.plx
 4162 root      20   0 10140 6212 1668 S      9  0.3  23:28.03 dns-resolver.pl
13299 root      20   0  2808 1212  804 R      9  0.1   0:00.07 top
 4686 root      20   0 32940  11m 3028 S      4  0.6 163:57.32 ctasd


Memory is normal at the moment: 

/root # ps auxf | sort -nr -k 4 | head -5
810      28489  1.0 18.9 1205400 387520 ?      Ssl  12:18   3:07 /var/chroot-http/usr/bin/httpproxy -f -c /var/chroot-http -u httpproxy
root      4324  1.8 12.3 339384 253364 ?       Ssl  16:27   0:58 /usr/bin/cssd -d
snort     5520  0.3  5.5 385324 113612 ?       S


Most of the swap is allocated to the HTTP proxy (Run top then press 'O' (capital letter o) followed by 'p' then 'enter'. Now processes should be sorted by their swap usage.)

top - 17:22:28 up 3 days,  8:16,  1 user,  load average: 0.67, 1.22, 1.30
Tasks: 344 total,   1 running, 341 sleeping,   0 stopped,   2 zombie
Cpu(s):  2.4%us,  2.7%sy,  0.0%ni, 94.6%id,  0.3%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   2048484k total,  1666536k used,   381948k free,     3732k buffers
Swap:  1048572k total,   401552k used,   647020k free,   606832k cached

  PID USER      PR  NI  VIRT  RES  SHR S   %CPU %MEM    TIME+  SWAP COMMAND
28489 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:36.18 799m httpproxy
28490 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:07.72 799m httpproxy
28491 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.74 799m httpproxy
28505 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.14 799m httpproxy
28508 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.75 799m httpproxy
28509 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.83 799m httpproxy
28510 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.50 799m httpproxy

28511 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.47 799m httpproxy
28512 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.43 799m httpproxy
28513 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.43 799m httpproxy
28514 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.41 799m httpproxy
28515 httpprox  20   0 1177m 377m 1312 S      0 18.9   0:00.45 799m httpproxy


There are  too many child-processes for httpproxy is this normal?


This thread was automatically locked due to age.
Parents
  • rebooting doesn't help..i would stop doing that.  Two gigs isn't going to be enough you need a minimum of 4 gigs just to hold your current load.  if you have anything over that double it to 8.  i talked about this over and over during the beta and was told i didn't know what i was talking about...[:)]

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

  • rebooting doesn't help..i would stop doing that.  Two gigs isn't going to be enough you need a minimum of 4 gigs just to hold your current load.  if you have anything over that double it to 8.  i talked about this over and over during the beta and was told i didn't know what i was talking about...[:)]


    Unfortunately the UTM 120 Rev 5 can only take up to 2Gb and therefore i have no way to upgrade RAM unless I go back to my custom box
    I am going to troubleshoot more. I will fist set the http_db back to none (currently disk)
  • Hi Wingman,
    I had the same problem with a 4gb utm until I removed the cffs from memory, since then swap has hardly moved.

    Ian
  • Hi Wingman,
    I had the same problem with a 4gb utm until I removed the cffs from memory, since then swap has hardly moved.

    Ian


    good to know.I will try this and post back. I am using http_db disk option. I will remove it completely and see how it goes
  • Hi Wingman,
    I had the same problem with a 4gb utm until I removed the cffs from memory, since then swap has hardly moved.

    Ian


    what all do you have running and how many users?  I currently have no swappiness tweak, two snorts and http in mem mode and staying at @60% ram and zero swap.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Reply
  • Hi Wingman,
    I had the same problem with a 4gb utm until I removed the cffs from memory, since then swap has hardly moved.

    Ian


    what all do you have running and how many users?  I currently have no swappiness tweak, two snorts and http in mem mode and staying at @60% ram and zero swap.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Children
No Data