This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Blank Screen

I have just finish installing Astaro 9.003-15 on a 1u Asus KFSN4-DRE dual AMD Opteron Quad core system everything install with no errors then it ask to reboot. i get 

Booting Sophos UTM 9.0
Root (hd0'0)
filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz root=/dev/disk/by-label/root vga=791 rootflags=data=ordere
d splash=silent
[linux-bzImage, setup= 0x300, size=0x220d90]
 initrd /boot/initrd
[Linux-initrd @ 0x37c70000, 0x3776cd bytes]
blinking cursor -

then all I get is a Blank screen with no activity server is on but screen just blank.

(Tried boot into recovery mode this is what i see

kernel/boot/vmlinuz root=dev/vga=normal video=ofonly nolapic acpi=off splash silent

panic: early exception 0d rip 10:ffffffff81078652 error 0 cr2 0

probing EDD (edd=off to disable) . . . ok)


64bit
dual Intel PCI-E GbE LAN
dual BroadcomRegistered BCM5721 PCI-E GbE LAN
VGA: XGIRegistered Z9s VGA Controller /32MB DDR2 VRAM
SATA Controller
1TB Hard Drive
32 GB Ram

ASUS - Server & Workstation- ASUS KFSN4-DRE

Please help need to get this up ASAP  
Thanks


This thread was automatically locked due to age.
  • Hi, is this a new system, or one you've used recently for something else?

    I'd recommend running memtest86 (available from the installation CD) or other hardware tests.

    I would suggest booting another linux disc on this system and getting the outputs of lspci, but since it's not very new, there should be drivers for it already.

    Do you have a recent BIOS installed?

    Barry
  • I ran memtest86  a set of 2 ram was bad once remove system boot 

    Thank you BarryG