This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Astaro 8.3 - 9.01 Hardware Compatability Questions

I'm obviously new to the forums - hello scott [:D]
I've fallen in love with the ease of use of many Astaro 120s and 220s that we use at my workplace, and am looking forward to building a low profile home PC to use with the free home use license. I have a few questions to start off, and my chosen hardware follows them.

In no particular order:

1) How much hard drive space is needed or recommended for logging?
2) How much ram does the OS support? 
3) Does it have drivers for the newer motherboard chipsets?
4) Would there be any benefit to a SATA 2 vs SATA 3 SSD hard drive?
5) Does it utilize multicore processors to the fullest extent? 
6) Would there be a benefit to using an i7 over a Core i5 (where the i7 supports hyperthreading for example)
7) Does it have any sort of temperature sensing support? if i supply the chasis with an adjustable speed fan, does the OS utilize this, or at the very least, does it let the BIOS handle this and not override the functionality of it?
8) Will the built in drivers support advanced features of any of the below hardware (such as VLANs for example, on the nics)?
9) Is there any way to update the drivers with a linux version from the following hardware manufacturers, if needed (and applicable)?

Intel EXPI9400PTBLK 10/ 100/ 1000Mbps PCI-Express Gigabit Copper Connection for Servers - OEM
Antec ISK 310-150 Black / Silver 0.8mm cold rolled steel Mini-ITX Desktop Computer Case 150W Power Supply
Intel BOXDQ77KB LGA 1155 Intel Q77 HDMI SATA 6Gb/s USB 3.0 Mini ITX Intel Motherboard
Athena Power AP-MFATX40 400W Mini ITX 80 PLUS BRONZE Certified Active PFC Power Supply

Intel Core i7-3770S Ivy Bridge 3.1GHz (3.9GHz Turbo) LGA 1155 65W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I73770S
-OR-
Intel Core i5-3450S Ivy Bridge 2.8GHz (3.5GHz Turbo) LGA 1155 65W Quad-Core Desktop Processor Intel HD Graphics 2500 BX80637I53450S

CORSAIR 8GB (2 x 4GB) 204-Pin DDR3 SO-DIMM DDR3 1333 Laptop Memory Model CMSO8GX3M2A1333C9

Thanks to all.


This thread was automatically locked due to age.
Parents
  • 1)  20GB is the minimum that you would want to use, but more would be better, depending on how much is being logged and the configured retention period.
    2)  As long as you install with the x64 kernel, it will recognize as much as you can throw at it.  For the upcoming v9, consider 2GB to be the reasonable functional mimimum, but 4GB+ will give you better performance.
    3)  The upcoming v9 has an updated kernel, which should support any newer motherboard that you want to use.  Others here may be able to provide specifics on chipsets they've had success with.
    4)  SATA3 can push more data faster.  v8 of Astaro has generic minimal support for SSDs.    V9 adds support for some of the more advanced features such as trim.
    5)  Yes, Astaro has support for multicore and multiple processors.  Not certain what's meant by fullest extent.  [[:)]]
    6)  You would most likely see performance benefits from using an i7 core processor for multi-threaded processes.
    7)  This would be based on the BIOS of the motherboard.  Astaro itself, as the OS, doesn't have this.
    8)  VLans are supported.  [[:)]]
    9)  This one is tricky.  Astaro is a purpose built custom distro of linux.  We do not support installing your own software or drivers on the box (no yast or yum).  That being said, as a home user, you can hack and slash to your hearts content, but if things break, be prepared to do a re-install.  Closely related, direct changes made to config files from the shell can and probably will be reverted back to default settings.

    I'm of the belief that you should put in the best hardware that you can afford at the time for any computer system.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Reply
  • 1)  20GB is the minimum that you would want to use, but more would be better, depending on how much is being logged and the configured retention period.
    2)  As long as you install with the x64 kernel, it will recognize as much as you can throw at it.  For the upcoming v9, consider 2GB to be the reasonable functional mimimum, but 4GB+ will give you better performance.
    3)  The upcoming v9 has an updated kernel, which should support any newer motherboard that you want to use.  Others here may be able to provide specifics on chipsets they've had success with.
    4)  SATA3 can push more data faster.  v8 of Astaro has generic minimal support for SSDs.    V9 adds support for some of the more advanced features such as trim.
    5)  Yes, Astaro has support for multicore and multiple processors.  Not certain what's meant by fullest extent.  [[:)]]
    6)  You would most likely see performance benefits from using an i7 core processor for multi-threaded processes.
    7)  This would be based on the BIOS of the motherboard.  Astaro itself, as the OS, doesn't have this.
    8)  VLans are supported.  [[:)]]
    9)  This one is tricky.  Astaro is a purpose built custom distro of linux.  We do not support installing your own software or drivers on the box (no yast or yum).  That being said, as a home user, you can hack and slash to your hearts content, but if things break, be prepared to do a re-install.  Closely related, direct changes made to config files from the shell can and probably will be reverted back to default settings.

    I'm of the belief that you should put in the best hardware that you can afford at the time for any computer system.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Children
  • 1)  20GB is the minimum that you would want to use, but more would be better, depending on how much is being logged and the configured retention period.
    2)  As long as you install with the x64 kernel, it will recognize as much as you can throw at it.  For the upcoming v9, consider 2GB to be the reasonable functional mimimum, but 4GB+ will give you better performance.
    3)  The upcoming v9 has an updated kernel, which should support any newer motherboard that you want to use.  Others here may be able to provide specifics on chipsets they've had success with.
    4)  SATA3 can push more data faster.  v8 of Astaro has generic minimal support for SSDs.    V9 adds support for some of the more advanced features such as trim.
    5)  Yes, Astaro has support for multicore and multiple processors.  Not certain what's meant by fullest extent.  [[[:)]]]
    6)  You would most likely see performance benefits from using an i7 core processor for multi-threaded processes.
    7)  This would be based on the BIOS of the motherboard.  Astaro itself, as the OS, doesn't have this.
    8)  VLans are supported.  [[[:)]]]
    9)  This one is tricky.  Astaro is a purpose built custom distro of linux.  We do not support installing your own software or drivers on the box (no yast or yum).  That being said, as a home user, you can hack and slash to your hearts content, but if things break, be prepared to do a re-install.  Closely related, direct changes made to config files from the shell can and probably will be reverted back to default settings.

    I'm of the belief that you should put in the best hardware that you can afford at the time for any computer system.


    Thank you for your replies thus far, i should have been a little more specific in my question about the SSDs. what i meant to ask was 4) if there was a noticeable speed difference as far as astaro and its functions are considered. i realize in windows, in gaming, in video editing etc that this is indeed true.
    5) I really just meant hyperthreading i suppose. I realize a quad core processor should be enough, and that 8x core (hyperthreading) would be even more beneficial for various tasks, but is there a point where i will cease to notice a speed difference between 4x and 8x core? from what i remember for example, the actual astaro 220 ASG hardly utilizes all of its cpu which is (i believe) nowhere near as powerful as an i5 or i7.
    8) I would hope VLANS are supported [;)] but to be specific, are you saying that the drivers that the astaro OS utilizes, will let VLANS function on the external (and / or 2x internal) NICs mentioned above?

    *10) lastly, you mention upcoming V9, but the link i was given to an iso has it named as "asg-8.301-9.1.iso". admittedly i have not tried to install it,even on a spare box at work, just yet. so what version should i expect to be currently released as of: 2012-Mar-05 09:34:08 ?

    thanks [[[:)]]]