This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

1 asg, 2 red?

Ok, so I currently manage 3 different homes each with their own ASG.  Each house has pretty beefy bandwidth (35Mb/35Mb async FiOS). With ASG 8 I noticed that my now aging hardware on two of the ASGs is running pretty hard (40-70% CPU, 70% RAM, 40% swap, etc).  I thought rather than replace these two ASGs with bigger, better hardware, I might try putting REDs at those two locations. 

Total IPs will almost certainly be under 50 at all times (there are normally less than 5 devices at one house, and less than 15 each at the other two).  

Has anyone here done anything like this and have any recommendations/cautions/other solutions?

The third ASG has a much faster CPU and I can stick 4GB (it has 2 currently) of RAM in it if needed.

Also, I don't know if it's appropriate to ask this question, but does anyone know a ballpark figure for the cost of a RED? Is it somewhere in the $100-200 range? Don't need exact figures, just something +/-$50 so I can ballpark the cost difference of the RED vs purchasing new equipment.

Thanks,

-Bob


This thread was automatically locked due to age.
Parents
  • Ok, so after some looking around this is what I came up with:
    -The vostro solution suggested would cost  ~$450
    -A complete home-grown i-3 solution would cost ~$500
    -Upgrading the MB/RAM in the current boxes would cost ~$225

    The only scenario in which I would spend less than $700 for both boxes is if I just upgraded.  I'm not saying that's a bad thing, but that does mean that I'll have to pull my network down while I upgrade, which is also not necessarily bad unless something is DOA.

    Just for reference, the i-3 solution consists of the following:
    -Intel DBS1200KP mini-ITX motherboard
    -4GB Crucial DDR3 1066 RAM
    -Intel Core i-3 2120T 35W CPU
    -Western Digital 160GB SATA3 7200RPM HDD
    -APEX MI-008 Case w/250W PS
    -Prolimatech PRO-SAM17 CPU heatsink

    If you think these specs are excessive and have a better solution for cheaper I'd love to hear it: I'm always happy to save cash.

    Edit:
    I did find a barebone D525 system that with RAM and HDD would cost ~$325.  That might not be too bad.
Reply
  • Ok, so after some looking around this is what I came up with:
    -The vostro solution suggested would cost  ~$450
    -A complete home-grown i-3 solution would cost ~$500
    -Upgrading the MB/RAM in the current boxes would cost ~$225

    The only scenario in which I would spend less than $700 for both boxes is if I just upgraded.  I'm not saying that's a bad thing, but that does mean that I'll have to pull my network down while I upgrade, which is also not necessarily bad unless something is DOA.

    Just for reference, the i-3 solution consists of the following:
    -Intel DBS1200KP mini-ITX motherboard
    -4GB Crucial DDR3 1066 RAM
    -Intel Core i-3 2120T 35W CPU
    -Western Digital 160GB SATA3 7200RPM HDD
    -APEX MI-008 Case w/250W PS
    -Prolimatech PRO-SAM17 CPU heatsink

    If you think these specs are excessive and have a better solution for cheaper I'd love to hear it: I'm always happy to save cash.

    Edit:
    I did find a barebone D525 system that with RAM and HDD would cost ~$325.  That might not be too bad.
Children
  • Ok, so after some looking around this is what I came up with:
    -The vostro solution suggested would cost  ~$450
    -A complete home-grown i-3 solution would cost ~$500
    -Upgrading the MB/RAM in the current boxes would cost ~$225

    The only scenario in which I would spend less than $700 for both boxes is if I just upgraded.  I'm not saying that's a bad thing, but that does mean that I'll have to pull my network down while I upgrade, which is also not necessarily bad unless something is DOA.

    Just for reference, the i-3 solution consists of the following:
    -Intel DBS1200KP mini-ITX motherboard
    -4GB Crucial DDR3 1066 RAM
    -Intel Core i-3 2120T 35W CPU
    -Western Digital 160GB SATA3 7200RPM HDD
    -APEX MI-008 Case w/250W PS
    -Prolimatech PRO-SAM17 CPU heatsink

    If you think these specs are excessive and have a better solution for cheaper I'd love to hear it: I'm always happy to save cash.

    Edit:
    I did find a barebone D525 system that with RAM and HDD would cost ~$325.  That might not be too bad.


    replacing your firewall is going to involve downtime no matter what..[:)]  let me look around if you are prepared to move instantly sometimes i can fine some awesome deals hold on.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow