This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Where does the license counter get the IPs from?

Hi,

we recently switched from an appliance to a software licence. Now I'm a little confused where the license counter gets the IPs from.

Whe have several subnets in separate VLANs. For example:
VLAN 100 - 10.0.0.0/24
VLAN 101 - 10.0.1.0/24
VLAN 102 - 10.0.2.0/24

They are all connected to a layer 3 switch, which has an IP address (10.0.x.254) in each subnet an acts as a router between those nets. Of course the clients use the layer 3 switch as default gateway.

The ASG is also connected to the layer 3 switch in a seperate VLAN (VLAN 199, IP of firewall = 10.0.199.1, IP of switch = 10.0.199.254). The switch uses the ASG as default gateway. So all destination IPs that can not be routed internally are forwarded to the ASG. There is no NATing in between.

Now I look at the license counter of the ASG and there is only one IP counted. It's 10.0.199.254.
So where does the license counter get the IPs from? I can see all real internal source IPs in the log files. But they are not counted.

Thanks for your input,
Stephan


This thread was automatically locked due to age.
Parents Reply Children
  • If it's not NATted, then something in your configuration, or on the ASG, is having trouble looking at IPs on that VLAN.  Another thought -- the ASG will not count IPs attached to an interface that has a default gateway defined (as these are generally internet connections) -- does your internal interface on the ASG have a default gateway set?  IF so, remove it and create static routes (or policy routes, OSPF, etc.) instead.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.