Save your config settings for 802.2 first Go to site: ftp://ftp.astaro.de/ASG/v8/hardware_appliance/iso/ssi-8.202-28.1.iso If you have Astaro Box (I assume) Burn the CD disk, and connect the external USB disk to Astaro with USB panel on front, restart Astaro. -PUt back your config 802.2 OR In order to roll back to a previous version, you will need to perform the following steps:
1) In Management>>Backup/Restore, create a new config-backup (or use an existing one) and download it off of the Astaro onto your workstation/laptop. 2) Go to ftp://ftp.astaro.de/ASG and download the applicable ISO for the version that you wish to roll back to. Use ssi images if you have an appliance or asg image for a software version. 3) Burn the image to disc at no higher speed than 8x. 4) Insert disc into cr-rom/dvd-rom drive (if you have an astaro appliance, you'll need to use a drive connected through usb) and reboot the Astaro. Install, then restore your config-backup.
Save your config settings for 802.2 first Go to site: ftp://ftp.astaro.de/ASG/v8/hardware_appliance/iso/ssi-8.202-28.1.iso If you have Astaro Box (I assume) Burn the CD disk, and connect the external USB disk to Astaro with USB panel on front, restart Astaro. -PUt back your config 802.2 OR In order to roll back to a previous version, you will need to perform the following steps:
1) In Management>>Backup/Restore, create a new config-backup (or use an existing one) and download it off of the Astaro onto your workstation/laptop. 2) Go to ftp://ftp.astaro.de/ASG and download the applicable ISO for the version that you wish to roll back to. Use ssi images if you have an appliance or asg image for a software version. 3) Burn the image to disc at no higher speed than 8x. 4) Insert disc into cr-rom/dvd-rom drive (if you have an astaro appliance, you'll need to use a drive connected through usb) and reboot the Astaro. Install, then restore your config-backup.
Thanks for your comments. For information, we are using Alcatel-Lucent OmniAccess 4504 wireless infrastructure. I confirm everything is working well after downgrading to 8.203. It's the second time since September that Astaro firmware upgrades are causing major issues ! [:@] It's clearly not acceptable.
