This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Zotac ZBOX Nano VD01

Hello there,

i want to share my experiences with this fine box from zotac.
First i've tried to running Astaro v8.203 (32bit) within an VM (KVM/Proxmox), CPU (VIA Nano X2 @ 1.2GHz, dualcore) supports Intel-VT (VMX) and 64bit.
The VM has 2 (VM-)CPUs, 2GB Ram.
The Performance with just one user and proxy/ips/nat/appfilter was ok, but if there are more users, the vm runs into 70-90% (VM-)cpu load (otherwise the host only shows up to 50% load) and the surfing in the internet is veeerrryyyy ssllooooowwww. [:(]

So i installed native, without virtualization.
Here i access the 2 cores, 4GB Ram and a 120GB hdd (5400/8, SATA2). With all features enabled it works great, cpu load with (currently) 2 users only at 5-10% (sometimes it grows up to 30% for a very short time). Very fast surfing.
I'm actually using 1 NIC (Via VT6130 onboard, GBit) with a second IP-Adress (external) and setup up my rules with this config, works great, all features usable.

Very nice and cheap box (~ 150€ in Germany), ideal for home-use Astaro and/or small offices (i think up to 10 Users (maybe more?), like the ASG110). [:)]

Any question? Please ask, i'll try to figure out...

Manuel aka "Umpf"


This thread was automatically locked due to age.
Parents
  • Hello Manuel,

    would you please tell me a bit more about your zbox installation? I am planing to buy such a box to for my astaro installation @ home. I currently using a borderware appliance as host for my astaro. Quite fast but also energy hungry ~85 to 120 Watts =%-) 24/7 ...:/

    My questions are :

    -is the WLAN module supported/working on the VD01 by astaro?
    -how did you get more than one virtual interfaces on a physical interface running?
     VLAN with IP aliases or only IP aliases? (is this sufficent for DMZ and Intra?) Please explain a bit more to me.
    -What about the overall performance? You wrote about fast surfing..., which services do you use on your astaro appliance, really all services?

    Best regards
    Junkz
  • Hello Junkz,

    sorry for my short answers, but i'm ill, very powerless at the moment.

    - No WLAN
    - I've used the first-start-assistant to set up an internal interface and add an additional (external) IP to reach my gateway (Fritzbox, which handels my dect-phones). This additional "interface" shows up in my subnet-list so i can handle it like any other (native) interface (nat-rules, paketfilters, proxy etc.).
    - I'm using all features except mail-encryption, high availability and web application filter (see screenshot).

    The box runs within a gbit-environment (HP Procurve 1810-24G), the wan is 6mbit, transfer-rates to my synologys runs with around 40-50MBit thruput (the syn is the limiting factor i think), from/to the nas-stations i've created an ips-exception to get high transfer-rates.
Reply
  • Hello Junkz,

    sorry for my short answers, but i'm ill, very powerless at the moment.

    - No WLAN
    - I've used the first-start-assistant to set up an internal interface and add an additional (external) IP to reach my gateway (Fritzbox, which handels my dect-phones). This additional "interface" shows up in my subnet-list so i can handle it like any other (native) interface (nat-rules, paketfilters, proxy etc.).
    - I'm using all features except mail-encryption, high availability and web application filter (see screenshot).

    The box runs within a gbit-environment (HP Procurve 1810-24G), the wan is 6mbit, transfer-rates to my synologys runs with around 40-50MBit thruput (the syn is the limiting factor i think), from/to the nas-stations i've created an ips-exception to get high transfer-rates.
Children