Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 2314 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Throughput

lbn
Hello,

I have a little question about the UTM Throughput of the ASG220. On the datasheet, it wrote that there are a 95 mbps UTM Throughput. Is that correct ? I don't have a ASG220 for test the UTM performence..

I ask that because sonicwall says the TZ210 has 50mbps UTM Throughput..... but in reality it has 18 mbps UTM Throughput..

A customer has a connection at 60mbps and I don't know wich model bought. It's just for 7 servers.

Thank in advance.


This thread was automatically locked due to age.
  • 0
    The true throughput is highly dependent on what features are enabled, how they are configured, etc.  Enabling IPS, Web Content Filtering, etc. has an effect on what the true throughput values are -- so it's hard to say in your case, as we don't know anything about the configuration, etc.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • 0 in reply to BrucekConvergent
    The features enabled are :
    - WAF (with all protection activated)
    - IPS
    - web content filtering for the antirivus/antimalware with dual scan

    It's only to protect her web server.

    Thank for your response BrucekConvergent
  • 0
    If you're only using Web Application Security and the Intrusion Prevention capability of Network Security, then a 220 would seem to be a good choice.  I suspect it would be a good investment to buy a second 220 to run in Hot-Standby.

    If you're a new reseller, I suggest you submit the question to Astaro Support - they should have some skin in the game.  If not, then you should ask your reseller for a recommendation.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0
    I'd like to add that if you are going to buy a second unit for hot-standby, you would only need to purchase a second appliance and would not need to buy a second license.  Inexpensive for the piece of mind it affords.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Cookie Information Banner