This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Home-use version for Astaro hardware

I am using an ASG110 at home, and I'm considering an update to run the home-use version because of the more-expansive licensing it affords. I've seen the threads indicating how I get the home-use ISO to load onto the device, so I know I can manage that much.
My bigger concern is whether or not my existing configuration backup will be compatible with the home-use software.
In the 2+ years that I've had the device, I've done some extensive configuration of things (remote access, NAT rules are good examples) that I really don't want to have to rebuild by hand.
Anyone else been successful with such a conversion? Or am I stuck with either the hardware license limits or the requirement to manually rebuild the config after a conversion?


This thread was automatically locked due to age.
Parents
  • Very helpful link. I have about had it with issues on the 8.x code line, so I'm going to take the time to revert to 7.x. When I do that, I'll give the conversion to home license a whirl--I've already got the license codes--to see if my life improves after that. :-)
  • Very helpful link. I have about had it with issues on the 8.x code line, so I'm going to take the time to revert to 7.x.


    And our experience has been just the opposite. We're running 8.1xx in production and on our 120's the system is rock solid. 8.2xx OTOH, I'm not going to touch till the pile has stopped steaming. [:D]
Reply
  • Very helpful link. I have about had it with issues on the 8.x code line, so I'm going to take the time to revert to 7.x.


    And our experience has been just the opposite. We're running 8.1xx in production and on our 120's the system is rock solid. 8.2xx OTOH, I'm not going to touch till the pile has stopped steaming. [:D]
Children
No Data