This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

missing port Jetway NF99FL-525 with dual NIC plus AD3INLANG

Hi everyone,

I have a newly aquired Jetway NF99FL-525 Dual Core Atom Mini-ITX Mainboard that has 2 NICs (82574L) and added a 3port AD3INLANG

the install of 8.102 went fine, updated to 8.103 although I am missing one of the built-in NICs.

I've tested the mobo and the port is functional although it doesn't show up in astaro.

The other 3 Intel NICs (82541GI) on the add-on are all functional.

The funny thing is that they all show up in lspci, but not in Interfaces & Routing -> Interfaces -> Hardware

02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
05:04.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05)
05:06.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05)
05:07.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05)

Ideas?

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 14 years ago

...and you're certain that it isn't a bad port on the NIC? To test, I'd boot up with some livecd distro that wouldn't mess with the Astaro install.

I suppose that you could try manually adding it in /etc/udev/rules.d/70-persistent-net.rules and see what happens, as long as you know the mac address.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 14 years ago

...and you're certain that it isn't a bad port on the NIC? To test, I'd boot up with some livecd distro that wouldn't mess with the Astaro install.

I suppose that you could try manually adding it in /etc/udev/rules.d/70-persistent-net.rules and see what happens, as long as you know the mac address.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 RFCat_vk_01 over 14 years ago in reply to Scott_Klassen

Where did you find the GA?

I can only find the latest up2dat for 8.200 and 8.201 dated 18/8/2011 1655

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 hardware over 14 years ago in reply to Scott_Klassen

...and you're certain that it isn't a bad port on the NIC?  To test, I'd boot up with some livecd distro that wouldn't mess with the Astaro install.

I suppose that you could try manually adding it in /etc/udev/rules.d/70-persistent-net.rules and see what happens, as long as you know the mac address.

It is visible with a fedora livecd and both ports are functional. Any way to find the mac address without having to bring down the box again?

here is lspci -v:

Only difference between the two is the device serial number which is not the MAC.

Any help appreciated.

02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
        Subsystem: Intel Corporation Device 0000
        Flags: fast devsel, IRQ 18
        Memory at fe7e0000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at cc00 [size=32]
        Memory at fe7dc000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
        Capabilities: [e0] Express Endpoint, MSI 00
        Capabilities: [a0] MSI-X: Enable- Mask- TabSize=1
        Capabilities: [100] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Kernel modules: e1000e

03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
        Subsystem: Intel Corporation Device 0000
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at fe8e0000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at dc00 [size=32]
        Memory at fe8dc000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
        Capabilities: [e0] Express Endpoint, MSI 00
        Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=5
        Capabilities: [100] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140] Device Serial Number 60-6b-a5-ff-ff-12-40-00
        Kernel driver in use: e1000e
        Kernel modules: e1000e
Cancel
Vote Up 0 Vote Down

Cancel