This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hw: Jetway JNC9C-550-L

Hi everybody,

after running my ASG 7.5.x on an old DELL PIII Machine with 4 NICs and limited up to 512 MB RAM I'm thinking about buying new Hw for moving over to ASG 8.x.y.

Because I'm a little bit laizy and don't want to screw myself I looked out for a pre-built mini ITX board with case, power supply, etc.

Well, after searching and comparing for a while I found this equipment which will fulfill my needs:

Jetway JNC9C-550-LF with Jetway ADD-ON 3x GigaLAN 2 GB RAM and 40 GB SATA HDD. All things bundled and placed in a MHero-S-B Mini-ITX enclosure.

Well, the description on the sites mentioned above is in German, but the technical data are in English ;-) Here are some hard facts in short:

Mainboard:

CPU  INTELRegisteredAtom N550 CPU(45nm,512K Cache, 2x1.50 GHz, 667 MHz FSB)
Chipset  - INTELRegisteredAtom N550 + NM10 chipset
- Build-in INTELRegisteredGMA 3150 Graphics Core (DVMT max. 384MB)
- Front Side Bus 667MHz 
Ethernet LAN  2x Realtek RTL8111E PCI-E Gigabit Ethernet LAN

Additional 3-Port-Nic-Card:

Jetway J2AD3RTLANG (Realtek Chips - no idea which one)

Well, my question is if anyone has experiences with this equipment. Better more has ASG 8.x.y successfully installed on it and is running it for a while.

Any feedback would be greatly appreciated!

Greetinx 

Guido


This thread was automatically locked due to age.
Parents
  • Can you use the astaro accespoints with an astaro software version or do i need an appliance.
  • Jetway JNC9C-550-LF with Jetway ADD-ON 3x GigaLAN 2 GB RAM and 40 GB SATA HDD. All things bundled and placed in a MHero-S-B Mini-ITX enclosure.


    Hi Guido,

    dual-LAN + ready-to-go Atom-board is exactly what I'm looking for to run the current ASG as gateway/Firewall/VPN-server at home. I wouldn't need the extra 3 NICs since I'd just hookup the AP/Switch combo (Netgear WNDR3700) I've been using so far. 

    Your setup is running fine so far? If that's the case, I think this combo for 250€ + RAM + HDD/SSD (which I have lying around already) would make a great Astaro for the money. 
    If you can recommend it I'll go for it immediately, thanks for sharing your search result here [:D]

    regards from Freiburg.
Reply
  • Jetway JNC9C-550-LF with Jetway ADD-ON 3x GigaLAN 2 GB RAM and 40 GB SATA HDD. All things bundled and placed in a MHero-S-B Mini-ITX enclosure.


    Hi Guido,

    dual-LAN + ready-to-go Atom-board is exactly what I'm looking for to run the current ASG as gateway/Firewall/VPN-server at home. I wouldn't need the extra 3 NICs since I'd just hookup the AP/Switch combo (Netgear WNDR3700) I've been using so far. 

    Your setup is running fine so far? If that's the case, I think this combo for 250€ + RAM + HDD/SSD (which I have lying around already) would make a great Astaro for the money. 
    If you can recommend it I'll go for it immediately, thanks for sharing your search result here [:D]

    regards from Freiburg.
Children
No Data