This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need to build a system capable of maintaining 200Mbs WAN speed

Hi everyone.

I am ready to build/purchase a system to install ASG v8 for home use.  The system at a minimum needs to be able to maintain 100Mbs to the WAN, preferably closer to 200Mbs.

I currently have 100Mbs connection for my internet (Japan), but the ISP's now offer speeds twice that, so when I upgrade the line I want to be able to maintain my maximum throughput and still be able to run all security features.

I have been browsing the forums for about a week now and have already learned a great deal.  I was hoping that some of you may have knowledge of the hardware required to maintain these speeds.

I am very open to suggestions and want to purchase quality parts.  Not knowing how powerful the system really needs to be though, I don't want to go overboard.

I will probably go with good quality Intel NICs, maybe an SSD, and as much memory as needed.  I guess the CPU would probably be the major thing I am unsure of.

Thanks!


This thread was automatically locked due to age.
Parents Reply Children
  • Rabbix - I built an Astaro I'm using at home with devices similiar to what you have.  This runs great for me:

    Intel BOXD525MW Intel Atom D525@ 1.8GHz (Dual Core) - $85 (here)
    Crucial 4GB (2 x 2GB) 204-Pin DDR3 SO-DIMM DDR3 1066 (PC3 8500) Dual Channel Kit Laptop Memory - $45 (here)
    OCZ Onyx OCZSSD2-1ONX32G 2.5" 32GB SATA II MLC Internal Solid State Drive (SSD) - $77 (here)
    Intel PWLA8391GTL 10/ 100/ 1000Mbps PCI PRO/1000 GT Low Profile Desktop Adapter 1 x RJ45 - OEM - $28 (here)
    (Used case and power supply I already had)

    Installed 8.102.   Set up web proxy content filtering in memory as shown here.

    Two gigabit NICs (1 onboard and 1 pci).  Plenty of RAM.  Dual core low power processor.  Runs great.  Power usage according to Kill-A-Watt device is only 33 watts.