Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 2 subscribers
  • Views 3826 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Refusal of a local network after updating

kirsanoff
After updating from version 8.003 to 8.100 or 8.101 there is a network switching-off on internal interface of ASG. Switch D-LINK (4-port) is connected to the internal interface. All the local network after the switch has ceased to receive addresses on DHCP. If to connect the computer directly to the internal interface it receives the IP address on DHCP and connects in the Internet.
With version 8.003 all worked normally.


This thread was automatically locked due to age.
Parents
  • 0
    You can attach a USB memory stick and copy your current configuration:
    /var/confd/var/storage

    Are the hosts ARP resolved you try to ping?
    arp -an

    Anything in packetfilter log?
    tail -f /var/log/packetfilter.log

    Anything in selfmonitor log?
    tail -f /var/log/selfmon.log

    Cheers
     Ulrich
Reply
  • 0
    You can attach a USB memory stick and copy your current configuration:
    /var/confd/var/storage

    Are the hosts ARP resolved you try to ping?
    arp -an

    Anything in packetfilter log?
    tail -f /var/log/packetfilter.log

    Anything in selfmonitor log?
    tail -f /var/log/selfmon.log

    Cheers
     Ulrich
Children
No Data
Cookie Information Banner