This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Refusal of a local network after updating

After updating from version 8.003 to 8.100 or 8.101 there is a network switching-off on internal interface of ASG. Switch D-LINK (4-port) is connected to the internal interface. All the local network after the switch has ceased to receive addresses on DHCP. If to connect the computer directly to the internal interface it receives the IP address on DHCP and connects in the Internet.
With version 8.003 all worked normally.


This thread was automatically locked due to age.
Parents
  • Hi, 
    First try a different cable.

    Then, check the interface speed & duplex settings under Network Interfaces; maybe you'll need to lock them at 100/Full or 1000/Full.

    If this solves the problem, please let us know what NIC you are using.

    Barry
Reply
  • Hi, 
    First try a different cable.

    Then, check the interface speed & duplex settings under Network Interfaces; maybe you'll need to lock them at 100/Full or 1000/Full.

    If this solves the problem, please let us know what NIC you are using.

    Barry
Children
No Data