This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 7.508 Soft-Released

Hello! After a lot of work by our development and QA teams, Up2Date 7.508 is now available as part of our soft-release process. As many are waiting for this package, I will re-state that while soft-release Up2Dates are considered final, they may be slightly tweaked for stability after a period of 5-10 days before the general "push" to all installations (based on the feedback of the users here and our own continued QA during this time). Production environments may wish to wait for the official GA push for 7.508.

7.508 contains two main areas - some new abilities and final polish to the GA-release of our Wireless Security offering, and the V7-to-V8 'upgrade' option for ASG hardware appliance users. We have also upgraded and improved the IPS engine and added outbound spam scanning for V7 (which already exists in V8).

The V7 to V8 upgrade process will reset all existing logs and reports in your V7 installation, but all other settings will be preserved, including the current contents of the mail quarantine. We would be particularly interested in your experiences with the upgrade procedure, and invite you to post your results and feedback here in this thread, which will be closely monitored until the GA up2date push in early November. 

Lastly, as previously stated, this one-touch upgrade process is only available to ASG appliance users. Software installations can easily move to version 8 by installing the ISO image to their platform and restoring a V7 backup file from version 7.507+.

Up2date 7.508 Details
 Size: 179 Megabytes (182688179 bytes)
 Md5 : cdbbd59d36a6ac2f19f60be7094753b0
 Link: ftp://ftp.astaro.de/pub/ASG/v7/up2date/u2d-sys-7.508.tgz.gpg

Remarks:[/B]

  • Configuration will be upgraded
  •  System will be rebooted
  •  Connected REDs will perform firmware upgrade
  •  Connected APs will perform firmware upgrade


News:

  •  Added Wireless Security support (GA)
  •  Added option to upgrade to V8 for hardware appliances
  •  Introduced outbound spam scanning support
  •  Improved IPS engine


Bugfixes:

  • ID11371 eDirectory authentication may stop working when no BaseDN is
  • specified
  •  ID11932 WAN connectivity hangs when changing the "daily reconnect" time on a PPPoE interface
  •  ID12449 ASG conflicts when using special character ")" in PPPoE password
  •  ID12539 Pushed dns servers are randomly not used
  •  ID13085 HTTP Proxy restarts in a loop
  •  ID13126 Link status of LAG interfaces terminology changes
  •  ID14089 Antispam daemon restarts frequently during certain scenarios
  •  ID14654 Blank Executive Report


This thread was automatically locked due to age.
  • I'll have to let the developers answer that one Bob- we may be able to do something creative, I just don't know.  I'm monitoring the QA cases and will update this thread when I have something better than a guess.
  • Hi,
    some of the tabs within wireless security show my wireless security as being disabled because my licence has expired?
    The ASG WAP30 is still passing traffic quite happily and I can edit the wireless client list.

    I have surfed the web, checked access to this site.

    The dashboard shows wireless security to be active with 1 AP connected.

    My licence doesn't show wireless security. The licence is my original licence which I upgraded before the new v8 version was released.

    Ian M
  • I installed 7.508 with no problems. I need to upgrade 8.0 in order to address SSO issues (see my other thread about 2008R2 SSO issues). Astaro Support says I need to be on 8.0 as this is a know issue that is corrected. 

    https://community.sophos.com/products/unified-threat-management/astaroorg/f/52/t/27702

    When I downloaded 8.01 and tried to run the update, it fails saying 8.00 is needed as a prerequisit. 8.00 is not available from the ftp site, only 8.01 and 8.02 are available. 

    How can I get updated so I can finally put this problem to rest and get up to version 8.02? 

    Also, there is a new updater application tab that says I am not licensed. What is this new feature?
  • @mbrophy:

    Did you have updated your license?

    That's required for the upgrade.....see KB AKB000881
  • I installed 7.508 with no problems. I need to upgrade 8.0 in order to address SSO issues (see my other thread about 2008R2 SSO issues). Astaro Support says I need to be on 8.0 as this is a know issue that is corrected. 

    https://community.sophos.com/products/unified-threat-management/astaroorg/f/52/t/27702

    When I downloaded 8.01 and tried to run the update, it fails saying 8.00 is needed as a prerequisit. 8.00 is not available from the ftp site, only 8.01 and 8.02 are available. 

    How can I get updated so I can finally put this problem to rest and get up to version 8.02? 

    Also, there is a new updater application tab that says I am not licensed. What is this new feature?


    If on ASG hardware, there will be an upgrade package, or you can reinstall and restore your config with v8.

    If on sotfware/custom hardware, reinstall from ISO is the only option, and restore your backup.
  • scheduled update to v7.508 - no issue

    Upgrade to v8 - last step (upgrade self) pendig - still looking for a way to download my logs and saved exec-reports 

    M$
  • Hi Ian-

    Can you please PM or email me your license number?  I want to take a closer look at this one.  Thanks

    jdaniel@astaro...
  • scheduled update to v7.508 - no issue

    Upgrade to v8 - last step (upgrade self) pendig - still looking for a way to download my logs and saved exec-reports 

    M$


    You will need to SCP (use WinSCP if you manage from a Windows platform, it's easy to use) to copy the log archives off... the logs can be found on the Astaro in /var/log/

    Not sure where the saved executive reports are stored, I'm sure they are on there somewhere.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • @BrucekConvergent

    Thanks for the path...
  • Hi JackD,
    you should have the details.

    Regards

    Ian M