This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New Home setup

Hi,

I am now looking at upgrading my astaro home setup.

It is currently running in Hyper-v and is restricted to approx 20mbps throughput due to the legacy nics.

I have a couple of old pc's knocking about, and was thinking of using one of them to setup either a hardware appliance or vmware server 2.02 appliance.

Is there much difference in performance??

The two pc's I have are:

Intel 1.3 Ghz system 1Gb DDR 40GB ide HDD 2 x GBit NICs (Realtex RTL8169SC)
AMD Semperon 3.0Ghz 1GB DDR 40GB ide HDD 2 x GBit NICs (Realtec RTL8169SC)

I am due to be upgrading my broadband to 100mbps download and 10mbps upload, and obviously would like the new appliance to cope with these speeds.

Any ideas if these rigs would be quick enough??

Is the Realtec RTL8169SC chipset supported by astaro??

And help would be great

Andy


This thread was automatically locked due to age.
Parents
  • if you are going to be pushing that much bandwidth i would suggest ditching the realteks and getting some intel nics (pro 1000)

    i dont think you will see 100mbps with realteks on either of those systems, due to the fact they are software driven interfaces, but you never know, you could get lucky.

    personally i would go with the AMD setup + some intel nics.  you should be able to get close to max bandwidth that way
Reply
  • if you are going to be pushing that much bandwidth i would suggest ditching the realteks and getting some intel nics (pro 1000)

    i dont think you will see 100mbps with realteks on either of those systems, due to the fact they are software driven interfaces, but you never know, you could get lucky.

    personally i would go with the AMD setup + some intel nics.  you should be able to get close to max bandwidth that way
Children
No Data