This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Gateway 110 - DHCP and syslog license

Hello All,

We have a setup which uses mutiple ISPs in a Primary and Secondary fashion and are considering using Gateway 110 device to secure our secondary connection. Now the secondary connection will remain inactive at most times and the 10 user licence will be more than sufficent for our purpose. But I wanted to configure a DHCP scope and syslog server on the Gateway 110 so I was wondering does the 10 user licence restrict the number of DHCP IP addresses the device can allocate or does the licence restriction only apply to number of connections routed through its interfaces?

The DHCP scope we want to setup will have /27 mask (i.e. 30 IP addresses). But we do not expect more than 5 devices to be routed accross the Gateway.

Regards,
S

This thread was automatically locked due to age.

0 BAlfson over 15 years ago

Hello, S, and welcome to the User BB!

The limitation is on the actual number of IPs "seen" by the Astaro. If more than 10 devices ask for an IP, you will exceed the number of allowed IPs. One of my clients has VoIP phones that were using an external time server before installing an ASG110, and the phones maxed-out the alloted IPs. They solved the problem by having the phones get NTP service from an internal server.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 srpatel over 15 years ago in reply to BAlfson

Thanks Bob.

Appreciate your clarification on the issue.

Regards,
S
Cancel
Vote Up 0 Vote Down

Cancel