This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 7.502 Cannot Access Web Interface (VMPlayer)

Hello All

Hope you're all well, I wonder if someone could help me, I've looked in this forum for other people having the same problem and I've come across 2 people who did but resolved it different ways, I've tried these ways but still no luck!

I've downloaded ASG 7.502 from the VMware Market Place and running it in VMWare Player 3.0. the image seems to boot up no problem, but I can't seem to access the web interface to start/complete the initial configuration. Once the image boots is stops at:

192.168.0.1
login: 

I've logged in as root and configured a password. By looking at other threads I've tried to make sure that both ASG and the VMWare Interface are are within the same subnet mask, which they are, here is the result of the ifconfig command in ASG

eth0          
Link Encap: Ethernet
inet addr:192.168.0.1   Bcast:192.168.0.255   Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500   Metric:1

lo
Link encap: Local Loopback
inet addr:127.0.0.1   Mask:255.0.0.0
UP LOOKBACK RUNNING    MTU:16436    Metric: 1

And here is the results of the Windows Interface that the VMWare Player is running on (I'm Running Windows 7)

Wireless LAN adapter Wireless Network Connection 2:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Wireless LAN adapter Wireless Network Connection:

   Connection-specific DNS Suffix  . : cable.virginmedia.net
   IPv4 Address. . . . . . . . . . . : 192.168.1.52
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1

Ethernet adapter Local Area Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Ethernet adapter VirtualBox Host-Only Network:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::48e7:1947:3ae:8bed%24
   IPv4 Address. . . . . . . . . . . : 192.168.56.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Ethernet adapter VMware Network Adapter VMnet1:

   Connection-specific DNS Suffix  . :
   IPv4 Address. . . . . . . . . . . : 192.168.230.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Ethernet adapter VMware Network Adapter VMnet8:

   Connection-specific DNS Suffix  . :
   IPv4 Address. . . . . . . . . . . : 192.168.0.10
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :

Tunnel adapter isatap.{9789F203-B5E6-4E29-A349-EA8066939759}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Tunnel adapter isatap.cable.virginmedia.net:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : cable.virginmedia.net

Tunnel adapter isatap.{073BEE3D-76BD-4F14-819A-E4E1BDF22130}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Tunnel adapter isatap.{1BE7CB96-0C85-4B08-8D40-09CD150FD4ED}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Tunnel adapter isatap.{7B841899-4FC8-441F-A504-752090E42A93}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Tunnel adapter isatap.{DB01FD0F-1567-4B80-ABBE-DA46474C8721}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

My Personal LAN is the 192.168.1.X range, 1 being the Router and DHCP address being issued from 50 upwards. As the subnet masks on both networks are 255.255.255.0 I can't see how they would conflict so I'm guessing it's not that

I've tried changing the VMWare adapters to hosts only but that didn't work

the VMware Image came with 3 Bridged networked adapters

I hope someone can help!

Thanks

Dave


This thread was automatically locked due to age.
Parents
  • Hi

    your asg has: 192.168.0.1
    your pc has: 192.168.1.52

    --> there is no routing between these subnets

    please change your pc's ip to 192.168.0.22 and do the initial setup by accessing the web gui. after that you can change the IP of the eth0 to an ip in the 192.168.1.0/24 range
  • Hi

    your asg has: 192.168.0.1
    your pc has: 192.168.1.52

    --> there is no routing between these subnets

    please change your pc's ip to 192.168.0.22 and do the initial setup by accessing the web gui. after that you can change the IP of the eth0 to an ip in the 192.168.1.0/24 range


    unfortunately, that didn't work. I changed my network adapter to 192.168.0.22 once i did that it disconnected from the wireless network. I then booted up the VMWare image and tried to connect to https://192.168.0.1:4444 and it timed out as usual.

    when changing the IP address I just input the IP as above and subnet of 255.255.255.0 but that didn't work. so I've reset it back to DHCP so I can get back onto the internet to post this

    any ideas? I didn't think I would need to change my Wireless Card's IP address if I'm dealing purely locally IE on the host machine with a VM machine running on it
Reply
  • Hi

    your asg has: 192.168.0.1
    your pc has: 192.168.1.52

    --> there is no routing between these subnets

    please change your pc's ip to 192.168.0.22 and do the initial setup by accessing the web gui. after that you can change the IP of the eth0 to an ip in the 192.168.1.0/24 range


    unfortunately, that didn't work. I changed my network adapter to 192.168.0.22 once i did that it disconnected from the wireless network. I then booted up the VMWare image and tried to connect to https://192.168.0.1:4444 and it timed out as usual.

    when changing the IP address I just input the IP as above and subnet of 255.255.255.0 but that didn't work. so I've reset it back to DHCP so I can get back onto the internet to post this

    any ideas? I didn't think I would need to change my Wireless Card's IP address if I'm dealing purely locally IE on the host machine with a VM machine running on it
Children
No Data