Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 2 subscribers
  • Views 1937 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configure ASG Software Appliance with LCD

ElAdMi
Hi,

is it possible to use this LCD: http://Alphacool Display with Toshiba T6963 with an Astaro V7 or V8 Software Appliance?

I read that LCD4Linux already installed. 

Some interesting links:

Alphacool LCD support in serdisplib, lcd4linux - the hard way | glennji.com

init-6.org - Your current run level: alphacool LCD


Thanks

ElAdMi


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Scott_Klassen
    The driver seems to ber loaded:

      63: udi = '/org/freedesktop/Hal/devices/usb_device_60c_4eb_1_0_0'
      usb_device.device_protocol = 255 (0xff)
      usb_device.version = 1.10000
      info.linux.driver = 'usb'
      usb_device.vendor_id = 1548 (0x60c)
      usb_device.is_self_powered = false
      info.subsystem = 'usb_device'
      usb_device.product_id = 1259 (0x4eb)
      usb_device.can_wake_up = false
      linux.hotplug_type = 2 (0x2)
      usb_device.vendor = 'EEH Datalink GmbH'
      info.product = 'ALPHACOOL USB DISPLAY'
      usb_device.bus_number = 5 (0x5)
      linux.subsystem = 'usb'
      usb_device.product = 'ALPHACOOL USB DISPLAY'
      linux.device_file = '/dev/bus/usb/005/002'
      info.udi = '/org/freedesktop/Hal/devices/usb_device_60c_4eb_1_0_0'
      usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2'
      usb_device.device_revision_bcd = 0 (0x0)
      usb_device.configuration_value = 1 (0x1)
      usb_device.max_power = 200 (0xc8)
      usb_device.num_configurations = 1 (0x1)
      usb_device.num_ports = 0 (0x0)
      usb_device.num_interfaces = 2 (0x2)
      usb_device.linux.device_number = 2 (0x2)
      linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2'
      usb_device.device_class = 255 (0xff)
      usb_device.serial = '1.0.0'
      info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'
      usb_device.device_subclass = 255 (0xff)
      info.vendor = 'EEH Datalink GmbH'
      usb_device.speed = 12.0000



    ElAdMi
  • 0 in reply to ElAdMi
    Nope,

    new driver must be compiled ; (

    ElAdMi
Cookie Information Banner