This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IBM hardware Questions

All,

I am considering an upgrade for astaro and was looking at the Lenovo M58e small form factor PC. Outside of the marvel 9057 ethernet card is any one aware of problem with astaro and lenovo PC's? Should I expect the marvel nic to be a problem? Here is a link to the box I am considering:

Lenovo ThinkCentre M58e 7259 B3U SFF Desktop PC - Intel Pentium Dual Core E6300 2.8GHz, 3GB DDR2, 500GB HDD, DVDRW, XP Professional/Windows 7 Professional at TigerDirect.com

With this box I will be ordering a second 10/100/1000 low profile nic.

Thanks in advance for your help!

Regards,
Jim


This thread was automatically locked due to age.
Parents
  • Angelo,

    I agree with you I grunt vs very modest electric savings, the C2D wins. The box I am getting is a Lenovo 8910AMU Core 2 Duo @2.93 gig (65 watts) with 2 gb of ram installed which will be upgraded to 4gb post delivery. The PC has an intel gibabit adapter on the mother board and I ordered a second intel gigabit NIC for the PCIe slot. I will be moving the Mtron solid state hard disk to this box. 

    Barry,
    I'll create an exception for the cable boxes on the Atom, you are right that should help. I think I will  only need to create an exception for the actiontec router because the actiontec is a DHCP server for the cable boxes on a different subnet from the primary network. 

    Regars,
    Jim
Reply
  • Angelo,

    I agree with you I grunt vs very modest electric savings, the C2D wins. The box I am getting is a Lenovo 8910AMU Core 2 Duo @2.93 gig (65 watts) with 2 gb of ram installed which will be upgraded to 4gb post delivery. The PC has an intel gibabit adapter on the mother board and I ordered a second intel gigabit NIC for the PCIe slot. I will be moving the Mtron solid state hard disk to this box. 

    Barry,
    I'll create an exception for the cable boxes on the Atom, you are right that should help. I think I will  only need to create an exception for the actiontec router because the actiontec is a DHCP server for the cable boxes on a different subnet from the primary network. 

    Regars,
    Jim
Children
No Data