This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware failure or Hardware not compatible

Hi, I installed Astaro Version 7.501 on a new Server.

The Server is a HP ML110 G5 Intel E2160 with 4 Nics installed. It works 2 days fine, today two network cards stop working and there are the following error messages:

I think it belongs to the Harddisk but the disk is new too.

Ide failed opcode was: unknown
end request: I/O error, dev hda, sector Buffer I/O error on device hda 5 logical block 1
hda task_in_intr stacks 0x51 Drive Ready Seek Complete Error hda: task in_intr_error_0x40 incorrectable error.

Any ideas?

This thread was automatically locked due to age.

Parents

0 BAlfson over 15 years ago

I would reseat the cables and cards first. If the problem still exists, then replace the drive. If you don't have a replacement drive at hand, then first try re-installing from ISO on the existing drive.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 15 years ago

I would reseat the cables and cards first. If the problem still exists, then replace the drive. If you don't have a replacement drive at hand, then first try re-installing from ISO on the existing drive.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data