This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Installation Help Please

I keep trying to install Astaro but it only gets to step 3 of 7, says install failed, reboot.

For hardware I purchased the same system as BarryG over in the first post in the Unofficial HCL list thread. The only differences are 1) I opted for a sata drive (Seagate ST980813ASG 2.5" 80GB 7200rpm), 2) instead of a USB DVD drive I just burned the image to a bootable flash drive.

Any assistance would be extremely helpful.

Thank you.

This thread was automatically locked due to age.

Parents

0 BarryG over 16 years ago

I think you'll need to use a real CD-ROM then... if you don't have a USB one, you could hook one up temporarily to the IDE port on the motherboard.

Barry
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BarryG over 16 years ago

I think you'll need to use a real CD-ROM then... if you don't have a USB one, you could hook one up temporarily to the IDE port on the motherboard.

Barry
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Redactor007 over 16 years ago in reply to BarryG

Ok, I'll give that a whack. Thanks.

Oh, any idea if the sata drive will give me fits? I noticed in your config that you used a pata drive but said something to the effect that other people have used a sata drive. I was just wondering if you knew of anyone who used this MB with a sata drive.

Thanks!
Cancel
Vote Up 0 Vote Down

Cancel