I tried to configure Arcor DSL with my Release 7.404 ASL, but somehow I failed :-/
The DSL modem is connected to eth0:
eth0 [Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller]
Auto negotiation: On
Supported link modes: 10baseT/Full,10baseT/Half,100baseT/Full,100baseT/Half
MAC Address: 00:30:05:15:15:01
Interrupt (IRQ): 193
PCI Device ID: 0x2449:0x3014
MII capable: Yes
The pppoe log shows me the errors below:
--------------------------------------------------
2009:11:17-00:20:28 stargate pppd-pppoe[9939]: pppd 2.4.3 started by root, uid 0
2009:11:17-00:20:28 stargate pppd-pppoe[9939]: Couldn't get channel number: Input/output error
2009:11:17-00:20:28 stargate pppd-pppoe[9939]: Script /usr/sbin/pppoe -I eth0 -m 1460 finished (pid 9940), status = 0x1
2009:11:17-00:20:28 stargate pppd-pppoe[9939]: Exit.
2009:11:17-00:20:28 stargate pppoe-sh: DSL connection time shorter then 60 seconds (0 sec): Error? - wait 5 seconds
2009:11:17-00:20:34 stargate pppoe-sh: Access-Concentrator: dusbr003 AC-Ethernet-Address: 00:30:88:01:66:96 --------------------------------------------------
2009:11:17-00:20:34 stargate pppd-pppoe[9954]: pppd 2.4.3 started by root, uid 0
2009:11:17-00:20:34 stargate pppd-pppoe[9954]: using channel 54
2009:11:17-00:20:34 stargate pppd-pppoe[9954]: Using interface ppp0
2009:11:17-00:20:34 stargate pppd-pppoe[9954]: Connect: ppp0 /dev/ttyp0
2009:11:17-00:20:34 stargate pppd-pppoe[9954]: Script /usr/sbin/pppoe -I eth0 -m 1460 finished (pid 9955), status = 0x1
2009:11:17-00:20:34 stargate pppd-pppoe[9954]: Modem hangup
2009:11:17-00:20:34 stargate pppd-pppoe[9954]: Connection terminated.
2009:11:17-00:20:34 stargate pppd-pppoe[9954]: Exit.
2009:11:17-00:20:34 stargate pppoe-sh: DSL connection time shorter then 60 seconds (0 sec): Error? - wait 5 seconds
2009:11:17-00:20:39 stargate pppoe-sh: Access-Concentrator: dusbr003 AC-Ethernet-Address: 00:30:88:01:66:96 --------------------------------------------------
Any ideas? Cheerio [:)]
This thread was automatically locked due to age.
