This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Mini fanless PC

For $169 I can get this mini, fanless PC that has the option of adding dual NICs (WDL Systems >> Products >> 24).  It says the CPU is "586-class" and is specifically labeled as MSTI PDX-600 (1GHz).  Would ASG run on this type of CPU?


This thread was automatically locked due to age.
  • Hi, Astaro needs a 686-class CPU such as a PIII or a modern VIA C7.

    The Atom system in my signature is fanless, but cost about $300USD. It has 2 NICs onboard.

    Barry
  • OK, 686 CPU, not 586-class.  Got it.  Thanks so much for the info.  It seems like Mini-ITX/Atom-based CPU is the way to go for a small, energy-efficient ASG machine that is reasonably priced.  I was hoping to keep the cost around $200.  If anyone else has any recommendations for mini PCs, please post.

    Best regards,
  • I know it's not fanless, but what about this motherboard which has a VIA C7 CPU? Newegg.com - JetWay J7F4K1G5S-LF VIA C7 VIA NanoBGA2 VIA CN700 Mini ITX Motherboard/CPU Combo - Motherboard / CPU / VGA Combo

    Or, better yet, here's a cheaper, fanless, Atom-based Mini-ITX board, but it only has one NIC.  Is there a recommended half-height PCI NIC that I could slap on to this bad boy?  http://www.newegg.com/Product/Product.aspx?Item=N82E16813186183
  • That first Jetway board says it has a Realtek 8110SC and according to:
    http://www.astaro.com/lists/HCL-ASG-V7.txt
    They say it won't work.

    The other one is a Realtek 8100, which is not listed either way.  So it's a chance, but it's only got one nic anyway.

    Also those boards are cheap, economy brand companies.  Foxcon and Jetway, I did read things from people who said to stay away from these brands.  For home, it's probably fine, but for a business, my friends wouldn't touch these brands.

    I tell you, I was lurking here for weeks checking out things and reading and guessing and worrying about what would or would not work.  I finally broke down and bit the bullet and bought the same board in BarryG's sig.  And it's a beautiful board.  It's expensive.  But it's from their Industrial line.  It's very nice.  And it works great.  

    https://community.sophos.com/products/unified-threat-management/astaroorg/f/52/t/27180

    Sure it was an extra $100 from the cheap ones I could find which I didn't know 100% for sure, but it works.  And from what I read, the cheaper ones use more power than this one.  Almost 2x more.  I haven't measured this, but if it's running for a couple years, you could save that extra $'s in electricity.  YMMV.
  • Thanks for the reply.  Thanks for bringing to my attention the fact that the Realtek adapters are not supported.  I wonder if Astaro will eventually build in support for more adapters.  Thanks for the link to your system with all of the components.  That motherboard looks great, but is a little pricey.