Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 1127 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

120s Mem Upgrade Path

mrlew
I presently have 2 x 120s running 512MB on 7.405 . One of the units is running very slow (taking 5+ mins to open Webadmin) memory running at 85-90%. I have sent off the s/n's and have ordered mem upgrades for them.
I am concerned however that the image shown on the model comparsion page is not the same as the units I have and have read elsewhere in the forum that older models have a 512MB limitation. The s/n's in question are:
A00004A8D3F68F4 &  A0000489E5DBE1C
Can someone confirm that these units are in fact capable of being upgraded to 1GB and also what is the maximum memory possible in these units. 

thanks in advance
mrlew


This thread was automatically locked due to age.
Parents
  • 0 in reply to ClausP
    They did change the case (it's a totally different appliance) in the latest Revisions of the appliances, so I understand your confusion.  Rest assured if the serials you have fall in the range of appliances allowed to upgrade via a simple memory DIMM swap, it will work.  I have a few customers that fell into that category (their appliance has the older case and appearance--the Revision 1 appliance), and the upgrades went fine (they are running 1GB now).

    BTW, I looked up your serial numbers in my Reseller memory upgrade guide; since the serial prefix is A00004 you can install the memory only upgrade kit.  You should be fine.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Reply
  • 0 in reply to ClausP
    They did change the case (it's a totally different appliance) in the latest Revisions of the appliances, so I understand your confusion.  Rest assured if the serials you have fall in the range of appliances allowed to upgrade via a simple memory DIMM swap, it will work.  I have a few customers that fell into that category (their appliance has the older case and appearance--the Revision 1 appliance), and the upgrades went fine (they are running 1GB now).

    BTW, I looked up your serial numbers in my Reseller memory upgrade guide; since the serial prefix is A00004 you can install the memory only upgrade kit.  You should be fine.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Children
No Data
Cookie Information Banner