This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to make data disk bigger

My data disk keeps filling up (v 7.305).  I have HTTP caching unchecked.  I have Astaro installed on a server with a 9GB drive and the data disk is 3.6 GB.  As a test I installed Astaro on another server with an 18GB drive and it shows the data disk is still the same size.  I thought it would be twice the size.  How do I get a bigger data disk?


--Scott


This thread was automatically locked due to age.
Parents
  • Hi,
    the minimum recommended size is 40gb from memory.

    Ian  M
  • Hi
    I have some 
    My Astaro Home User Licens achieved the Limit of 60 users, althogh there are no all make updata.and my sperskey .keyActive
    but when iam make updata it start ant the timer in 8 after that seen in screen this
    Network error http://dnl-01.geo.kaspersky.com/index/6/u0607g.xml 19/01/1430 01:08:25 ã
    what do ia mke to updata
    kamil
  • My data disk fills up when I run the JungleDisk backup program (on my Mac) which is backing up my computer to Amazon's S3 servers.  

    While it's backing up, if I click Clear Cache in Astaro, the data disk clears out and is no longer full (temporarily).  I have Enable Caching unchecked (Advanced HTTP Tab), so I don't understand why it's filling up in the first place.

    --Scott
  • Do you have virus scanning for HTTP enabled?
  • Yes, I have virus scan on.
  • So, the virus scanning feature is probably trying to save a copy of the file(s) being transferred, so it can scan them. (that's what it's supposed to do)

    So, either
    1. the files you're transferring are too big, and are filling up the disk on Astaro
    or
    2. Astaro is failing to cleanup after the scan.

    I'm guessing you're asking about making the data disk bigger because of #1.
    How big are your backups?

    For now, you should probably exclude that computer or that site from HTTP virus scanning.

    As far as your original question... I have 7.305 on a 72GB disk:
    df -h
    Filesystem            Size  Used Avail Use% Mounted on
    rootfs                5.3G  1.1G  4.0G  21% /
    udev                  506M   64K  506M   1% /dev
    /dev/disk/by-label/root
                          5.3G  1.1G  4.0G  21% /
    /dev/disk/by-label/boot
                          342M   15M  311M   5% /boot
    /dev/disk/by-label/storage
                           25G  305M   23G   2% /var/storage
    /dev/disk/by-label/log
                           33G  159M   31G   1% /var/log
    /dev/disk/by-label/tmp
                          1.7G   41M  1.6G   3% /tmp
    tmpfs                 506M   44K  506M   1% /var/storage/chroot-smtp/tmp/ram

    So, I have a 25GB storage partition.

    Barry
  • That makes sense because the backup has problems on the really big files.  The backup is several gigabytes, but it only does one file at a time.

    How do I exclude that computer from virus scan, do I go to the exceptions tab?

    What size does your data disk show on the dashboard?  Is there a way to change my data disk size?  I am not too familiar with using linux at the command prompt.


    --Scott
  • That makes sense because the backup has problems on the really big files.  The backup is several gigabytes, but it only does one file at a time.

    What size does your data disk show on the dashboard?  Is there a way to change my data disk size?  I am not too familiar with using linux at the command prompt.


    The dashboard on that server shows 24.5GB for "Data Disk".

    You haven't said how big the files are, but...

    The best way to change the size would be to 
    1. backup your configuration
    2. get an bigger disk (e.g. an 80GB)
    3. install Astaro on the new disk
    4. restore the config backup

    There are ways to resize partitions on linux, but you need a bigger drive anyways, right? Otherwise, you'd have to shrink the other partitions, which is a bad idea.



    How do I exclude that computer from virus scan, do I go to the exceptions tab?


    Probably. I don't use the http proxy, so hopefully some else can confirm.

    Barry
  • Instead of that, I would just add it to the skip list on the 'Advanced' tab.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Instead of that, I would just add it to the skip list on the 'Advanced' tab.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data