Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 1726 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

10 days into demo - license has expired

ThomasBall
Downloaded and set up demo.

Shut the machine down to install an extra NIC and I get your license has expired.

Can the demo only use three Nics?

The date is correct, the only clue might be an install in 2008?

   Tom


This thread was automatically locked due to age.
Parents
  • 0
    I guess I did not read the install notes?

    It appears that the demo is crippled to only 3 NICs.

    (Removed the 4th NIC and it worked)

    Tom
  • 0 in reply to ThomasBall
    Hmm... I was able to install 7.380 on my home firewall with 4 nics, boot up, log in, run the wizard, and load my config backup.
    Dunno if that helps.

    Barry
  • 0 in reply to BarryG
    Hi Tom,

    As Astaro isn't a plug and play system, the drivers and NIC installations/changes are not detected and installed at boot up. If as you say, you added a NIC after you installed the product, just make a backup, re-install with the desired hardware, (which will trigger the hardware installation process again) then restore the backup. There won't be a licensing issue with using more than 3 NICs.

    Cheers,

    -Angelo
  • 0 in reply to AngeloC
    What Angelo said... when installing new NICs, you'll want to backup your configuration, shutdown the system, install the hardware, then reinstall and restore you configuration.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Reply
  • 0 in reply to AngeloC
    What Angelo said... when installing new NICs, you'll want to backup your configuration, shutdown the system, install the hardware, then reinstall and restore you configuration.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Children
Cookie Information Banner