This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

What’s the most stable version7?

Dear All,

I am running an ASG425 Release 6.311 in very critical Systems, with a very good performance.

We decide to Upgrade for V7, my question is: What’s the most stable version7?

Thanks in advance.


This thread was automatically locked due to age.
Parents
  • The latest version, 7.104.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • Agreed, the last few versions have been pretty rock solid.
    (Apart from interface failover)
  • Simon, BruceK : Do either of you use your Astaro boxes as a DHCP server? 

    With 7.102 and 7.104 it will run for about 5 minutes and then the DHCP will stop handing out addresses.  Any computer with a static IP continues to access the internet with no problems.

    With 7.101 and 7.103 my Astaro DHCP server worked fine.  I'll wait for the 7.105 and try again.  Maybe it just likes the odd numbered releases.  For now, I have had to activate DHCP on a Windows 2003 server.

    Have I opened a support case?  No, as this is a home system.
  • We have several clients that use Astaro 7.104 with DHCP Server enabled (for wireless DMZs and the like), works fine.  You might have another system on your network somewhere that thinks it's the DHCP server... check all your access points, etc...

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • Sorry I wasn't more clear.  

    Network is the same.  It's in my house.  I can see all ends of it. There are no other devices on it with DHCP enabled.

    With Asg v7.101, 7.103 the Asg DHCP server works fine.
    With Asg v7.102, 7.104 the Asg DHCP server works for 5 minutes.

    When I turned on the DHCP on the Win2003 server, there were no IP conflicts, my 5 workstations get IP addresses and report that 
    the Win2003 server is the DHCP server that they got their addresses from.

    I'm glad all your v7 versions work great.  Mine doesn't.
  • I was pretty clear; just had that as a suggestion (I've overlooked that sort of thing myself before, sounds like you've checked and double-checked already)... are there any entries in the logs that indicate what's going wrong?

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • Here is the DHCP log from this past Saturday - Right before I had to switch DHCP servers.

    2008:03:02-15:33:55 (none) dhcpd: Internet Systems Consortium DHCP Server V3.0.3
    2008:03:02-15:33:55 (none) dhcpd: Copyright 2004-2005 Internet Systems Consortium.
    2008:03:02-15:33:55 (none) dhcpd: All rights reserved.
    2008:03:02-15:33:55 (none) dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
    2008:03:02-15:33:55 (none) dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
    2008:03:02-15:33:55 (none) dhcpd: Internet Systems Consortium DHCP Server V3.0.3
    2008:03:02-15:33:55 (none) dhcpd: Copyright 2004-2005 Internet Systems Consortium.
    2008:03:02-15:33:55 (none) dhcpd: All rights reserved.
    2008:03:02-15:33:55 (none) dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
    2008:03:02-15:33:55 (none) dhcpd: Wrote 0 deleted host decls to leases file.
    2008:03:02-15:33:55 (none) dhcpd: Wrote 0 new dynamic host decls to leases file.
    2008:03:02-15:33:55 (none) dhcpd: Wrote 6 leases to leases file.
    2008:03:02-15:33:57 (none) dhcpd: Listening on LPF/eth0/00:06:25:09:06:40/192.168.200/24
    2008:03:02-15:33:57 (none) dhcpd: Sending on   LPF/eth0/00:06:25:09:06:40/192.168.200/24
    2008:03:02-15:33:57 (none) dhcpd: Sending on   Socket/fallback/fallback-net
    2008:03:02-15:34:28 (none) dhcpd: DHCPINFORM from 192.168.200.88 via eth0
    2008:03:02-15:34:28 (none) dhcpd: DHCPACK to 192.168.200.88
    2008:03:02-15:34:47 (none) dhcpd: DHCPREQUEST for 192.168.200.88 from 00:19[:D]b:c3:b9:36 (Robert-PC) via eth0
    2008:03:02-15:34:47 (none) dhcpd: DHCPACK on 192.168.200.88 to 00:19[:D]b:c3:b9:36 (Robert-PC) via eth0
    2008:03:02-15:36:28 (none) dhcpd: DHCPDISCOVER from 00:15:f2:90:21:8e (House-PC) via eth0
    2008:03:02-15:36:29 (none) dhcpd: DHCPOFFER on 192.168.200.94 to 00:15:f2:90:21:8e (House-PC) via eth0
    2008:03:02-15:36:29 (none) dhcpd: DHCPREQUEST for 192.168.200.94 (192.168.200.254) from 00:15:f2:90:21:8e (House-PC) via eth0
    2008:03:02-15:36:29 (none) dhcpd: DHCPACK on 192.168.200.94 to 00:15:f2:90:21:8e (House-PC) via eth0
    2008:03:02-15:39:04 (none) dhcpd: DHCPINFORM from 192.168.200.93 via eth0
    2008:03:02-15:39:04 (none) dhcpd: DHCPACK to 192.168.200.93
    2008:03:02-15:39:07 (none) dhcpd: DHCPINFORM from 192.168.200.93 via eth0
    2008:03:02-15:39:07 (none) dhcpd: DHCPACK to 192.168.200.93
    2008:03:02-15:45:12 (none) dhcpd: Internet Systems Consortium DHCP Server V3.0.3

    The last line is actually the first line after rebooting the ASG.  In the 6 minutes between the last two entries, all access to the internet by DHCP clients is lost.

    I don't see any errors in there, at least not the actual word "error".  It could all be wrong and I wouldn't know it.

    It's an annoyance more than anything since I can use the Windows server to provide DHCP.  Just seems odd that it has worked fine for me with every "odd" release.
  • that is peculiar... does it fail on that same PC everytime (the one that was toying with the .93 address)?  Any entries in the IPS log or Packet filter log happening at the same time?

    Have you tried logging in via the shell and executing /var/mdw/scripts/dhcpd restart ? Does that restore functionality?

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • Sorry I use Windows 2003 DHCP server due to my DHCP requirements. (WPAD definitions and other stuff not supported in ASL).
Reply Children
No Data