Hi guys I have been browsing this forum for awhile now and just decided to register because of a problem I am running into.
I have Astaro Security Gateway software running on a Pentium II 700 Mhz, 376mb ram, 20gb HDD.
I have the following configuration but for some reason all computers on the DMZ cannot access the internet?
Eth0-LAN-192.168.2.100/24 -->wireless access point with WPA encyption
Eth1-WAN-ISP provided IP --> cable modem
Eth2-DMZ-10.32.16.0/8 --> Netgear LAN router configured as a switch
DNS:
Allowed networks are LAN and DMZ
DHCP Scopes:
IP:192.168.2.1-192.168.2.255 DNS:192.168.2.100 DGW: 192.168.2.100
IP:10.32.16.1-10.32.16.100 DNS1:68.87.75.194 DGW: 10.32.16.0
Packet Filter:
DMZ Network --> ANY --> WAN Network
WAN Network --> ANY --> DMZ Network
Masquerading:
LAN Network --> WAN
DMZ Network --> WAN
So the only thing I can think of is that I need a DNAT or SNAT rule defined to allow the DMZ network to access the internet? The whole point of the DMZ is to allow people unrestricted access to the internet through my network and at the same time keep them from accessing the LAN network or the Astaro Server.
Any help would be greatly appreciated!
This thread was automatically locked due to age.
