I've up2dated a few live units from 7.011 to 7.100; noted that on one 320, it took an extra 5 minutes or so after the 3 beeps that normally signify the unit is up and running for the webadmin to come online. This was only a problem after the first reboot following the up2date installation. THe other units didn't have this problem, but the key was that I didn't panic, and the 320 came up fine. I upgraded one that was configured to use AD SSO for the HTTP proxy, and followed the recommendations in the release notes closely, and still the SSO part will not work properly. It joined the AD domain fine, etc. just keeps reporting access denied. I've started a case with Astaro on that one... so if you use AD SSO, that might be something to be cautious of ... I just switched the proxy back to standard mode in the meantime.
Performance is good, so far I like it.
CTO, Convergent Information Security Solutions, LLC
Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries. Use the advice given at your own risk.
Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries. Use the advice given at your own risk.
Update on my SSO Issue; support found the problem, I'm the first one to have it... a problem with winbindd not initializing because of an outdated winbindd.pid file in /var/locks... we deleted it and restarted the proxy, and it worked. I've updated 2 other systems since, and no problems.. no SSO issues at all... I guess I was just unlucky with the one that acted up a little.
CTO, Convergent Information Security Solutions, LLC
Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries. Use the advice given at your own risk.
I just did two 220 (Rev2) with 7.011 running in a HA setup. They didn’t have that much configuration since they were recently installed. 5 legs/ports used, including HA. All went well. One click and then I was just a happy observer. Node 2 (slave) updated first. Then they switched. Then Node 1 updated. Very smooth.
I will probably do another 220 (Rev1) later this day. This one has a larger configuration though, including a handful of VPN-tunnels.
Updated an ASG 320 using manual update as we did not have the update file yet. No problems. The interface is much faster!! Http Proxy seems quicker also. Great Job Astaro and Beta testers.
I myself applied it last night, and was surprised by the smooth response and the greatly improved interface. Now I can use Opera to manage and stop firefox from hogging my system all day. I don't use SSO right now so all is good. We shall see what happens down the road.
Good luck to the 220 that is locked at 100%. Can you putty in?
I have install the update on an asg 220 and at reboot busy 100% with no internet no ping totaly asg unavailable...
so I use my backup 220
I have had astaro boxes hang on an update before. unplugging the server and repowering it usually kicked it in the pants and it got done with it's setup. I usually waited an hour before going to that drastic step though.
I install iso 7.100 on my 220 working... import backup 7.011 import good working with only my internal network...
so I put it in prod and as soon as I plug all my network connection busy 100% and unavailable asg.
I use LAG with vlan and bridge internal secure switch with a pppoe internet my internal is a standard interface with no vlan. http proxy, smtp proxy, ssl vpn about 30 packet filter rules...
I install iso 7.100 on my 220 working... import backup 7.011 import good working with only my internal network...
so I put it in prod and as soon as I plug all my network connection busy 100% and unavailable asg.
I use LAG with vlan and bridge internal secure switch with a pppoe internet my internal is a standard interface with no vlan. http proxy, smtp proxy, ssl vpn about 30 packet filter rules...
