hi
i have a fresh installation of ASG V7.001 with 3 NIC's. on one nic is the internet connected, on the other one is the dmz and on the third, there are the internal networks.
these networks are VLAN's.
so i have 4 VLAN's
VLAN 10 -> "Internal_LAN"
VLAN 11 -> "Angelo_LAN"
VLAN 15 -> "WLAN"
VLAN 20 -> "Printer_LAN"
These VLAN ID's are configured on a VLAN compatible/Layer 3 switch. So there are the following settings:
Port 1: VLANs 10, 11, 15, 20 (on this Port is the ASG connected)
Port 2: VLAN 11
Port 3-6: VLAN 10
Port 7: VLAN 20
Port 8: VLAN 15
All Ports, just Port 1 not, allow non tagged packets. Port 2 has PVID 11, Port 3-6 PVID 10, Port 7 PVID 20, and Port 8 PVID 15.
Ok this works now...
so i've configured the dhcp server now. I add three DHCP Servers for "Internal_LAN" "Angelo_LAN" and "WLAN". The Problem is now, that i get not the correct IP, wenn i connect a Workstation to Port 3-6 for this VLAN or else.
It lookes like, the DHCP Service works not realy correct with this VLAN config.
Has someone else this expirences?
This thread was automatically locked due to age.
