Running latest version 6.303
Can't seem to set duplex on eth1 like I used to be able to... I get this error:
(Intel Pro 1000 NICs)
micromine-gw:/home/login # mii-diag -F 10baseT-FD eth1
Setting the speed to "fixed", Control register 0100.
SIOCSMIIREG on eth1 failed: Operation not supported
Basic registers of MII PHY #0: 1140 796d 0141 0c23 0de1 0021 0004 2801.
Basic mode control register 0x1140: Auto-negotiation enabled.
You have link beat, and everything is working OK.
Your link partner is generating 10baseT link beat (no autonegotiation).
End of basic transceiver information.
Any ideas?
This thread was automatically locked due to age.
